Out of Stock
Randy's Worldwide : Zumbrota DrivetrainSKU: BSD-ZUM-RMTS5-47-3
Ford (7.5 - RWD) Manual Transmission Assembly - N/A - Zumbrota Drivetrain - RMTS5-47-3
$4,352.74
Shipping Estimate
Enter destination details for an instant shipping estimate. Final rates are confirmed at checkout.
Description
Manual Transmission
RMTS5-47-3
S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072
,0.76,0.76,1317-050-006,2WD,2WD,400-03072,400-3072,5.72,5.72,5SPD,5SPD,7.5L,7.5L,96,96,97,97,ELEC.,F6TA-LA,FORD,FORD,FORDTRANSZF1317,M/T,M/T,NO,RATIO,RATIO,RMT,RMT,SPEEDO,SPEEDO,T1317050006ZWR,TRANSMISSION,TS5-47-3,ZF,ZF,
S5-47 Manual Trans 96-97 Ford F-series 7.5L, 2WD, 5 Speed, PTO is NOT being used
ZF M/T '96-'97 FORD 7.5L, 5SPD, 2WD, 5.72-0.76 RATIO, NO SPEEDO, PTO Not Used
ZF M/T 96-97 FORD 7.5L , 5SPD , 2WD , 5.72-0.76 RATIO , ELEC. SPEEDO . No Speedo Hole (the tail housing is not cast for the hole), PTO Not Used
Zumbrota Drivetrain Manual Transmissions are rebuilt to the highest quality standards using a 3 step inspection process. Step 1 is a pre-inspection for case cracks, excessive wear, and OEM specific problems. Step 2 measures component parts to ensure OEM specifications are met. Step 3 ensures each unit is built to our exacting quality standards. Shaft straightness, gear wear and synchronizers are extensively tested to meet OEM specs. Seals are replaced and units are dyno-tested for operation, shiftability, and noise level. Unrivaled standards are set for unit precision and reliability at all critical touchpoints. Then an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by proprietary shot-enticed deep cleaning, sets the standard for manual transmission remanufacturing.
Quality inspections are conducted 3 times during the remanufacturing process
A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have
A second inspection is conducted during the reman process to ensure all component parts meet OEM specifications
A final post-build inspection is done to ensure unit is built to our strict standards
100% inspection of internal parts, including gear wear checks, mainshaft straightness test and synchronizer testing.
All transmissions are dynometer tested and ran through numerous real life scenarios.
S5-47 Manual Transmission for Ford 96-97 F-series 7.5L, 2WD, 5 Speed, PTO Not Used
Quality inspections are conducted 3 times during the remanufacturing process
A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have
A second inspection is conducted during the reman process to ensure all component parts meet OEM specifications
A final post-build inspection is done to ensure unit is built to our strict standards
100% inspection of internal parts, including gear wear checks, mainshaft straightness test and synchronizer testing.
All transmissions are dynometer tested and ran through numerous real life scenarios.
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Detailed Fitment Results
Year Make Model Drive Type Fitment Notes 1996 Ford F-250 RWD S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072 1996 Ford F-350 RWD S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072 1997 Ford F-250 HD RWD S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072 1997 Ford F-350 RWD S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072
RMTS5-47-3
S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072
,0.76,0.76,1317-050-006,2WD,2WD,400-03072,400-3072,5.72,5.72,5SPD,5SPD,7.5L,7.5L,96,96,97,97,ELEC.,F6TA-LA,FORD,FORD,FORDTRANSZF1317,M/T,M/T,NO,RATIO,RATIO,RMT,RMT,SPEEDO,SPEEDO,T1317050006ZWR,TRANSMISSION,TS5-47-3,ZF,ZF,
S5-47 Manual Trans 96-97 Ford F-series 7.5L, 2WD, 5 Speed, PTO is NOT being used
ZF M/T '96-'97 FORD 7.5L, 5SPD, 2WD, 5.72-0.76 RATIO, NO SPEEDO, PTO Not Used
ZF M/T 96-97 FORD 7.5L , 5SPD , 2WD , 5.72-0.76 RATIO , ELEC. SPEEDO . No Speedo Hole (the tail housing is not cast for the hole), PTO Not Used
Zumbrota Drivetrain Manual Transmissions are rebuilt to the highest quality standards using a 3 step inspection process. Step 1 is a pre-inspection for case cracks, excessive wear, and OEM specific problems. Step 2 measures component parts to ensure OEM specifications are met. Step 3 ensures each unit is built to our exacting quality standards. Shaft straightness, gear wear and synchronizers are extensively tested to meet OEM specs. Seals are replaced and units are dyno-tested for operation, shiftability, and noise level. Unrivaled standards are set for unit precision and reliability at all critical touchpoints. Then an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by proprietary shot-enticed deep cleaning, sets the standard for manual transmission remanufacturing.
Quality inspections are conducted 3 times during the remanufacturing process
A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have
A second inspection is conducted during the reman process to ensure all component parts meet OEM specifications
A final post-build inspection is done to ensure unit is built to our strict standards
100% inspection of internal parts, including gear wear checks, mainshaft straightness test and synchronizer testing.
All transmissions are dynometer tested and ran through numerous real life scenarios.
S5-47 Manual Transmission for Ford 96-97 F-series 7.5L, 2WD, 5 Speed, PTO Not Used
Quality inspections are conducted 3 times during the remanufacturing process
A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have
A second inspection is conducted during the reman process to ensure all component parts meet OEM specifications
A final post-build inspection is done to ensure unit is built to our strict standards
100% inspection of internal parts, including gear wear checks, mainshaft straightness test and synchronizer testing.
All transmissions are dynometer tested and ran through numerous real life scenarios.
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Detailed Fitment Results
Year Make Model Drive Type Fitment Notes 1996 Ford F-250 RWD S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072 1996 Ford F-350 RWD S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072 1997 Ford F-250 HD RWD S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072 1997 Ford F-350 RWD S5-47; ZF Built, Front And Rear Cases, Integral Bell Housing, Electronic Speedometer, 5.72 Low - 0.76 High Gear Ratio, PTO Is Not Being Used, ID: 1317-050-006, F6TA-LA, Hollander Numbers: 400-02275B, 400-03072
Related Products
94-99 Dodge Ram 2500 Base (RWD) Differential - Rear - Zumbrota Drivetrain - RAA435-1764B-P
$4,493.39
Cadillac, Chevrolet, GMC (4WD/RWD) Differential Ring and Pinion Kit - Rear - Yukon Gear and Axle - YGK2005
$2,548.94
Chevrolet, GMC (RWD) Differential - Rear - Zumbrota Drivetrain - RAA435-1215CL-P
$2,789.64
