96-98 Ford Mustang SVT Cobra Manual Transmission Assembly - N/A - Zumbrota Drivetrain - RMT45F-3

Manual Transmission
RMT45F-3
All Aluminum, Bell Housing Is Part Of The Front Case, Oil Drain Plug Points To The Side, Gear Driven Speed Sensor, Red 7 Tooth Speedometer Drive Gear, Cross Member Mount Is Behind The Speedo Hole, Tag Numbers: F6XR-CC, F6XR-7003CC, F6ZR-CC, F6ZR-7003CC, F7ZR-BA, F7ZR-7003BA, F8ZZ-BA, F8ZZ-7003BA, 1381-002, Hollander Number: 400-02870
,4.6L,400-02870,400-2870,5SPD,96,98,COBRA,DRIVEN,FORD,GEAR,M/T,MANUALTRANSMISS,MUSTANG,RED,RMT,SPEEDO,T45F-3,T7,VSS,
FM145 Manual Transmission for Ford 96-98 Mustang Cobra 4.6L, 5 Speed
M/T '96-'98 FORD MUSTANG COBRA 4.6L, 5SPD, GEAR DRIVEN VSS, RED, T7 SPEEDO
M/T 96-98 FORD MUSTANG COBRA 4.6L , 5SPD , GEAR DRIVEN VSS , RED , T7 SPEEDO .
Zumbrota Drivetrain Manual Transmissions are rebuilt to the highest quality standards using a 3 step inspection process. Step 1 is a pre-inspection for case cracks, excessive wear, and OEM specific problems. Step 2 measures component parts to ensure OEM specifications are met. Step 3 ensures each unit is built to our exacting quality standards. Shaft straightness, gear wear and synchronizers are extensively tested to meet OEM specs. Seals are replaced and units are dyno-tested for operation, shiftability, and noise level. Unrivaled standards are set for unit precision and reliability at all critical touchpoints. Then an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by proprietary shot-enticed deep cleaning, sets the standard for manual transmission remanufacturing.
Quality inspections are conducted 3 times during the remanufacturing process
A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have
A second inspection is conducted during the reman process to ensure all component parts meet OEM specifications
A final post-build inspection is done to ensure unit is built to our strict standards
100% inspection of internal parts, including gear wear checks, mainshaft straightness test and synchronizer testing.
All transmissions are dynometer tested and ran through numerous real life scenarios.
Quality inspections are conducted 3 times during the remanufacturing process
A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have
A second inspection is conducted during the reman process to ensure all component parts meet OEM specifications
A final post-build inspection is done to ensure unit is built to our strict standards
100% inspection of internal parts, including gear wear checks, mainshaft straightness test and synchronizer testing.
All transmissions are dynometer tested and ran through numerous real life scenarios.
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Case Material: Aluminum
Integral Bell Housing: Yes
Pre-Filled Oil: No
Speedometer Drive Type: Gear
Speedometer Type: Electric
Transmission Fluid Capacity: 4
Transmission Fluid Type: Mercon-V
Transmission Speeds: 5 Speed

Detailed Fitment Results
Year Make Model Sub Model Fitment Notes 1996 Ford Mustang SVT Cobra All Aluminum, Bell Housing Is Part Of The Front Case, Oil Drain Plug Points To The Side, Gear Driven Speed Sensor, Red 7 Tooth Speedometer Drive Gear, Cross Member Mount Is Behind The Speedo Hole, Tag Numbers: F6XR-CC, F6XR-7003CC, F6ZR-CC, F6ZR-7003CC, F7ZR-BA, F7ZR-7003BA, F8ZZ-BA, F8ZZ-7003BA, 1381-002, Hollander Number: 400-02870 1997 Ford Mustang SVT Cobra All Aluminum, Bell Housing Is Part Of The Front Case, Oil Drain Plug Points To The Side, Gear Driven Speed Sensor, Red 7 Tooth Speedometer Drive Gear, Cross Member Mount Is Behind The Speedo Hole, Tag Numbers: F6XR-CC, F6XR-7003CC, F6ZR-CC, F6ZR-7003CC, F7ZR-BA, F7ZR-7003BA, F8ZZ-BA, F8ZZ-7003BA, 1381-002, Hollander Number: 400-02870 1998 Ford Mustang SVT Cobra All Aluminum, Bell Housing Is Part Of The Front Case, Oil Drain Plug Points To The Side, Gear Driven Speed Sensor, Red 7 Tooth Speedometer Drive Gear, Cross Member Mount Is Behind The Speedo Hole, Tag Numbers: F6XR-CC, F6XR-7003CC, F6ZR-CC, F6ZR-7003CC, F7ZR-BA, F7ZR-7003BA, F8ZZ-BA, F8ZZ-7003BA, 1381-002, Hollander Number: 400-02870