Toyota (4.7 - 4WD) Drive Axle Assembly - Front - Zumbrota Drivetrain - RAA440-58885C

Front Axle Assembly
RAA440-58885C
Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential
,Remanufactured,7.5",IFS,Front,Axle,Assembly,2001,2002,2003,2004,Toyota,Tacoma,2005,2006,Tundra,4-Runner,3.91,Ratio,
Reman 7.5" IFS Axle Assembly, 2001-04 Tacoma, 00-06 Tundra, 01-02 4 Runner, 3.91
Remanufactured 7.5" IFS Front Axle Assembly, 2001-04 Toyota Tacoma, 2000-06 Tundra, 2001-02 4 Runner, 3.91 Ratio
Zumbrota Drivetrain Axle Assemblies are rebuilt to the highest quality standards of precision and reliability. Each Axle assembly is thoroughly inspected for straightness, cracks and surface wear. All internal components are fully inspected and tested including ring and pinions, internal gears, clutches and carriers. All bearings and seals are replaced. Gears are fully inspected for optimal tooth contact patterns and correct rolling torque using inch pound measurements for precise setup and longevity. Correct gear backlash is set to ensure proper gear lubrication and quiet operation. Axle tubes are inspected to ensure OEM standards of straightness. Zumbrota uses an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning, setting the standard for Axle assembly remanufacturing.
Units are shipped in high density plastic totes to help eliminate in-transit damage
All housings are tested for surface wear and cracks.
100% inspection of all internal parts, including Ring and Pinion’s, Internal Gears, Clutch’s and Carrier’s
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
Units are shipped in high density plastic totes to help eliminate in-transit damage
All housings are tested for surface wear and cracks.
100% inspection of all internal parts, including Ring & Pinion’s, Internal Gears, Clutch’s & Carrier’s
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
Axle Type: IFS
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fluid Capacity: 1.2
Fluid Included: No
Fluid Type: Non-Synthetic 80w-90
Gear Ratio: 3.91
Grade Type: Regular
Pre-Filled Oil: No
Ring Gear Diameter: 7.5

Detailed Fitment Results
Year Make Model Drive Type Fitment Notes 2001 Toyota 4Runner 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2001 Toyota Tundra 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2001 Toyota Tacoma 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2002 Toyota 4Runner 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2002 Toyota Tundra 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2002 Toyota Tacoma 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2003 Toyota 4Runner 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2003 Toyota Tundra 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2003 Toyota Tacoma 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2004 Toyota Tundra 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2004 Toyota Tacoma 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2005 Toyota Tundra 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential 2006 Toyota Tundra 4WD Ratio: 3.91; Toyota Clamshell, 7.5 Inch Ring Gear, IFS Front, With Automatic Disconnecting Differential