Chrysler, Dodge (5.7 - RWD) Drive Axle Assembly - Rear - Zumbrota Drivetrain - RAA440-1410

Rear Axle Assembly
RAA440-1410
Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB
Reman 210mm IRS Axle Assy 2006-11 Charger and 300, 05-08 Magnum, RWD, 2.82 Ratio
Remanufactured 210mm IRS Axle Assembly, 2006-11 Dodge Charger and Chrysler 300, 2005-08 Dodge Magnum, RWD, 2.82 Ratio
Zumbrota Drivetrain Axle Assemblies are rebuilt to the highest quality standards of precision and reliability. Each Axle assembly is thoroughly inspected for straightness, cracks and surface wear. All internal components are fully inspected and tested including ring and pinions, internal gears, clutches and carriers. All bearings and seals are replaced. Gears are fully inspected for optimal tooth contact patterns and correct rolling torque using inch pound measurements for precise setup and longevity. Correct gear backlash is set to ensure proper gear lubrication and quiet operation. Axle tubes are inspected to ensure OEM standards of straightness. Zumbrota uses an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning, setting the standard for Axle assembly remanufacturing.
Units are shipped in high density plastic totes to help eliminate in-transit damage
All housings are tested for surface wear and cracks.
100% inspection of all internal parts, including Ring and Pinion’s, Internal Gears, Clutch’s and Carrier’s
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
Units are shipped in high density plastic totes to help eliminate in-transit damage
All housings are tested for surface wear and cracks.
100% inspection of all internal parts, including Ring & Pinion’s, Internal Gears, Clutch’s & Carrier’s
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
Axle Type: IRS
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Fluid Capacity: 1.7
Fluid Included: No
Fluid Type: 75w-90 GL-5
Gear Ratio: 2.82
Grade Type: Standard Replacement
Pre-Filled Oil: No
Ring Gear Diameter: 210

Detailed Fitment Results
Year Make Model Sub Model Body Type Drive Type Bed Length (in) Fitment Notes 2005 Chrysler 300 C RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2005 Dodge Magnum R / T RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2006 Chrysler 300 C RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2006 Dodge Charger Pursuit / R / T / Daytona R RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2006 Dodge Magnum R / T RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2007 Chrysler 300 C RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2007 Dodge Charger Pursuit / R / T RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2007 Dodge Magnum R / T RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2008 Chrysler 300 C RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2008 Dodge Charger Pursuit / R / T / SE RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2008 Dodge Magnum R / T RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2009 Chrysler 300 C RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2009 Dodge Charger Pursuit / R / T / SE RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2010 Chrysler 300 C / S RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2010 Dodge Charger Pursuit / R / T / SE RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2011 Chrysler 300 C RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB 2011 Dodge Charger Pursuit / R / T / SE RWD Ratio: 2.82; 210mm Ring Gear, IRS, Without Posi Traction, ID: 4578032AB