Ford, Lincoln (4WD) Drive Axle Assembly - Front - Zumbrota Drivetrain - RAA440-1350X3

Front Axle Assembly
RAA440-1350X3
Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier
ZPA, Front Axle Assembly, Ford 8.8" IFS, '97-'04 Ford F150, 4.88 Ratio, Open
Zumbrota Performance Axle, Front Axle Assembly, Ford 8.8 IFS, '97-'04 Ford F150 ('04 Heritage), 4.88 Ratio, Open
When your lifestyle includes the needs for stronger traction, higher speeds and heavier towing capabilities, Zumbrota Performance Axles check the box. OE replacement is fine until bigger tires, higher horsepower, a boat or trailer require a higher caliber of strength to your drivetrain. This is where aftermarket ratios, limited slip differentials, lockers and high-quality nodular iron differential covers are needed to fit the way you drive. When choosing the best products in performance upgrades, Yukon Gear and Axle products were chosen for the engineering quality and reputation to take on the heaviest in performance and reliability. At Zumbrota, drivetrain axle assemblies are rebuilt to the highest quality standards of precision and reliability. Each Axle assembly is thoroughly inspected for straightness, cracks and surface wear. All internal components are fully inspected and tested including ring and pinions, internal gears, clutches, and carriers. All bearings and seals are replaced. Your choice of gears are fully inspected for optimal tooth contact patterns and correct rolling torque using inch-pound measurements for precise setup and longevity. Positraction and Locker choices finish the upgrade for performance. Zumbrota uses an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning, setting the standard for Axle assembly remanufacturing.
Front Axle Assembly for Ford 8.8 IFS with a Open in a 4.88 Ratio
Zumbrota Performance Axles are the standard in remanufacturing performance
Aftermarket gear upgrades are provided for enhanced performance for the way you drive
Custom options of Limited Slip Differentials and Lockers provide customized performance for the vehicle owner
High quality nodular steel ZPA differential covers are added to provide the highest strength protection to drivetrain internals
All tubes are inspected to ensure they are straightened to OEM specifications.
All housings are tested for surface wear and cracks.
Front Axle Assembly for Ford 8.8 IFS with a Open in a 4.88 Ratio
Zumbrota Performance Axles are the standard in remanufacturing performance
Aftermarket gear upgrades are provided for enhanced performance for the way you drive
Custom options of Limited Slip Differentials and Lockers provide customized performance for the vehicle owner
High quality nodular steel ZPA differential covers are added to provide the highest strength protection to drivetrain internals
All tubes are inspected to ensure they are straightened to OEM specifications.
All housings are tested for surface wear and cracks.
Axle Type: IFS
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Cover Included: Yes
Fluid Capacity: 2.2
Fluid Type: Non-Synthetic 80w-90
Gear Ratio: 4.88
Grade Type: Performance
Pre-Filled Oil: No
Ring Gear Diameter: 8.8

Detailed Fitment Results
Year Make Model Drive Type Fitment Notes 1997 Ford Expedition 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1997 Ford F-150 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1997 Ford F-250 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Under 8500 GVW, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1998 Ford Expedition 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1998 Ford F-150 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1998 Ford F-250 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Under 8500 GVW, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1998 Lincoln Navigator 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1999 Ford Expedition 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1999 Ford F-150 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1999 Ford F-250 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Under 8500 GVW, Zumbrota Performance Axle Fitted with a Non-Posi Carier 1999 Lincoln Navigator 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 2000 Ford Expedition 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 2000 Ford F-150 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 2000 Lincoln Navigator 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 2001 Ford Expedition 4WD Ratio: 4.88; Ford 8.8 Inch Ring Gear, IFS, Aluminum Cover, With Vacuum Disconnect, Zumbrota Performance Axle Fitted with a Non-Posi Carier 2001 Ford F-150 4WD Ratio: 4.88; Ford …