07-21 Toyota Tundra (5.7) Differential - Rear - Zumbrota Drivetrain - RAA435-50130A

Rear Axle Assembly
RAA435-50130A
Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts
Reman10.5" Rear Differential Assembly, 2007-21 Toyota Tundra, 4.30 Gear Ratio
Remanufactured 10.5" Rear Differential Axle Assembly, 2007-21 Toyota Tundra, 4.10 Ratio, Open
Zumbrota Drivetrain Axle Assemblies are rebuilt to the highest quality standards of precision and reliability. Each Axle assembly is thoroughly inspected for straightness, cracks and surface wear. All internal components are fully inspected and tested including ring and pinions, internal gears, clutches and carriers. All bearings and seals are replaced. Gears are fully inspected for optimal tooth contact patterns and correct rolling torque using inch pound measurements for precise setup and longevity. Correct gear backlash is set to ensure proper gear lubrication and quiet operation. Axle tubes are inspected to ensure OEM standards of straightness. Zumbrota uses an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning, setting the standard for Axle assembly remanufacturing.
4.10 Ratio
10.5 Inch Ring Gear
Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
100% inspection of all internal parts, including Ring and Pinion’s, Internal Gears, Clutch’s and Carrier’s
All housings are tested for surface wear and cracks.
All tubes are inspected to ensure they are straightened to OEM specifications.
4.10 Ratio
10.5 Inch Ring Gear
Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
100% inspection of all internal parts, including Ring & Pinion’s, Internal Gears, Clutch’s & Carrier’s
All housings are tested for surface wear and cracks.
All tubes are inspected to ensure they are straightened to OEM specifications.
Axle Type: Full Floating
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Cover Included: Yes
Fluid Capacity: 3.8
Fluid Included: No
Gear Ratio: 4.10
Grade Type: Standard Replacement
Mounting Hardware Included: No
Pre-Filled Oil: No
Ring Gear Diameter: 10.5

Detailed Fitment Results
Year Make Model Fitment Notes 2007 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2008 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2009 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2010 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2011 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2012 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2013 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2014 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2015 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2016 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2017 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2018 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2019 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2020 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2021 Toyota Tundra Ratio: 4.10; 10.5 Inch Ring Gear, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts