Chevrolet, GMC, Isuzu (4WD/RWD) Differential - Rear - Zumbrota Drivetrain - RAA435-2215A

Rear Axle Assembly
RAA435-2215A
Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, RWD with Off Road Chassis Package Option Z71, Without Increased Capacity Chassis Package Option Z85, and Without Sport Chassis Package Option ZQ8 and all 4WD, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts
,and,04,08,3.42,435-2215A,8.0,ASSY,AXLE,CANYON,COLORADO,DIFFS,GM,RAA,
Reman Rear Axle Assembly GM 8.0" 04-06 Colorado, Canyon, I-280, 3.42 Ratio, Open
Remanufactured Rear Axle Assembly, GM 8.0" 2004-06 Chevy Colorado, Canyon, 2006 Isuzu I-280, 3.42 Ratio, Open
Zumbrota Drivetrain Axle Assemblies are rebuilt to the highest quality standards of precision and reliability. Each Axle assembly is thoroughly inspected for straightness, cracks and surface wear. All internal components are fully inspected and tested including ring and pinions, internal gears, clutches and carriers. All bearings and seals are replaced. Gears are fully inspected for optimal tooth contact patterns and correct rolling torque using inch pound measurements for precise setup and longevity. Correct gear backlash is set to ensure proper gear lubrication and quiet operation. Axle tubes are inspected to ensure OEM standards of straightness. Zumbrota uses an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning, setting the standard for Axle assembly remanufacturing.
All tubes are inspected to ensure they are straightened to OEM specifications.
All housings are tested for surface wear and cracks.
100% inspection of all internal parts, including Ring and Pinion’s, Internal Gears, Clutch’s and Carrier’s
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
All tubes are inspected to ensure they are straightened to OEM specifications.
All housings are tested for surface wear and cracks.
100% inspection of all internal parts, including Ring & Pinion’s, Internal Gears, Clutch’s & Carrier’s
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
Axle Type: Semi Floating
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Cover Included: Yes
Fluid Capacity: 1.6
Fluid Included: No
Gear Ratio: 3.42
Grade Type: Regular
Mounting Hardware Included: No
Pre-Filled Oil: No
Ring Gear Diameter: 8.0

Detailed Fitment Results
Year Make Model Drive Type Fitment Notes 2004 Chevrolet Colorado 4WD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2004 Chevrolet Colorado RWD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, With Off Road Chassis Package Option Z71, Without Increased Capacity Chassis Package Option Z85, Without Sport Chassis Package Option ZQ8, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2004 GMC Canyon 4WD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2004 GMC Canyon RWD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, With Off Road Chassis Package Option Z71, Without Increased Capacity Chassis Package Option Z85, Without Sport Chassis Package Option ZQ8, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2005 Chevrolet Colorado 4WD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2005 Chevrolet Colorado RWD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, With Off Road Chassis Package Option Z71, Without Increased Capacity Chassis Package Option Z85, Without Sport Chassis Package Option ZQ8, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2005 GMC Canyon 4WD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2005 GMC Canyon RWD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, With Off Road Chassis Package Option Z71, Without Increased Capacity Chassis Package Option Z85, Without Sport Chassis Package Option ZQ8, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2006 Isuzu i-280 Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2006 Chevrolet Colorado 4WD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2006 Chevrolet Colorado RWD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, With Off Road Chassis Package Option Z71, Without Increased Capacity Chassis Package Option Z85, Without Sport Chassis Package Option ZQ8, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2006 GMC Canyon 4WD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, Ratio Option GU6, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2006 GMC Canyon RWD Ratio: 3.42; AAM 8 Inch Ring Gear, 10 Bolt Cover, With O…