03-06 Jeep Wrangler Differential - Rear - Zumbrota Drivetrain - RAA435-2150B

Rear Axle Assembly
RAA435-2150B
Ratio: 3.73; Dana 44, 8.5 Inch Ring Gear, Left Hand Drive, Rear Disc Brakes, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts
,03,06,3.73,435-2150B,ASSY,AXLE,BRAKES,D44,DIFFS,DISC,JEEP,RAA,REAR,WRANGLER,
Reman Axle Assembly for Dana 44 03-06 Wrangler 3.73 , Disc Brakes
D44 REAR AXLE ASSY '03-'06 JEEP WRANGLER 3.73, DISC BRAKES
Dana 44 REAR AXLE Assembly 03-06 JEEP WRANGLER 3.73 , DISC BRAKES .
Zumbrota Drivetrain Axle Assemblies are rebuilt to the highest quality standards of precision and reliability. Each Axle assembly is thoroughly inspected for straightness, cracks and surface wear. All internal components are fully inspected and tested including ring and pinions, internal gears, clutches and carriers. All bearings and seals are replaced. Gears are fully inspected for optimal tooth contact patterns and correct rolling torque using inch pound measurements for precise setup and longevity. Correct gear backlash is set to ensure proper gear lubrication and quiet operation. Axle tubes are inspected to ensure OEM standards of straightness. Zumbrota uses an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning, setting the standard for Axle assembly remanufacturing.
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
100% inspection of all internal parts, including Ring and Pinion’s, Internal Gears, Clutch’s and Carrier’s
All housings are tested for surface wear and cracks.
All tubes are inspected to ensure they are straightened to OEM specifications.
Reman Axle Assembly Dana 44 03-06 Jeep Wrangler 3.73 Ratio, Disc Brakes
Correct rolling torque established using inch pound measurement’s for precision setup and longevity
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
100% inspection of all internal parts, including Ring & Pinion’s, Internal Gears, Clutch’s & Carrier’s
All housings are tested for surface wear and cracks.
All tubes are inspected to ensure they are straightened to OEM specifications.
Axle Type: Semi Floating
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Cover Included: Yes
Fluid Included: No
Gear Ratio: 3.73

Detailed Fitment Results
Year Make Model Sub Model Body Type Drive Type Bed Length (in) Fitment Notes 2003 Jeep Wrangler SE / Sport / X / Sahara Ratio: 3.73; Dana 44, 8.5 Inch Ring Gear, Left Hand Drive, Rear Disc Brakes, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2004 Jeep Wrangler SE / Sport / X / Sahara Ratio: 3.73; Dana 44, 8.5 Inch Ring Gear, Left Hand Drive, Rear Disc Brakes, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2005 Jeep Wrangler SE / Sport / X Ratio: 3.73; Dana 44, 8.5 Inch Ring Gear, Left Hand Drive, Rear Disc Brakes, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2006 Jeep Wrangler SE / Sport / X / 65th Anniversary Edition Ratio: 3.73; Dana 44, 8.5 Inch Ring Gear, Left Hand Drive, Rear Disc Brakes, Without Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts