Chevrolet, GMC (4WD/AWD) Differential - Rear - Zumbrota Drivetrain - RAA435-1936C-P

Rear Axle Assembly
RAA435-1936C-P
Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts
,and,05,2WD,3.73,435-1936C-P,7.5,98,ASSY,AXLE,DIFFS,GM,POSI,RAA,REMAN,S10,S15,W/O,ZR2,
Reman Axle Assembly for GM 7.5" 98-05 S10 Blazer and S15 Jimmy, 3.73 Ratio, Posi
Reman Rear Axle Assembly GM 7.5" 98-05 Chevy S10 Blazer and GMC S15 Jimmy, 4wd, Non-ZR2, 3.73 Ratio, Posi
Zumbrota Drivetrain Axle Assemblies are rebuilt to the highest quality standards of precision and reliability. Each Axle assembly is thoroughly inspected for straightness, cracks and surface wear. All internal components are fully inspected and tested including ring and pinions, internal gears, clutches and carriers. All bearings and seals are replaced. Gears are fully inspected for optimal tooth contact patterns and correct rolling torque using inch pound measurements for precise setup and longevity. Correct gear backlash is set to ensure proper gear lubrication and quiet operation. Axle tubes are inspected to ensure OEM standards of straightness. Zumbrota uses an exclusive hydro-blast rinse and sandblasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning, setting the standard for Axle assembly remanufacturing.
Ratio: 3.73, Ratio Option GT4
GM 7.6 Inch Ring Gear
Without ZR2
With Posi Traction
Does Not Include Hubs, Brakes, Backing Plates, Or Axle ShaftsAll tubes are inspected to ensure they are straightened to OEM specifications.
All housings are tested for surface wear and cracks.
100% inspection of all internal parts, including Ring and Pinion’s, Internal Gears, Clutch’s and Carrier’s
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
Ratio: 3.73, Ratio Option GT4
GM 7.6 Inch Ring Gear
Without ZR2
With Posi Traction
Does Not Include Hubs, Brakes, Backing Plates, Or Axle ShaftsAll tubes are inspected to ensure they are straightened to OEM specifications.
All housings are tested for surface wear and cracks.
100% inspection of all internal parts, including Ring & Pinion’s, Internal Gears, Clutch’s & Carrier’s
100% replacement of bearings, seals, crush sleeves, pinion nuts and shims.
All housings are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
Axle Type: Semi Floating
California Proposition 65: WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Cover Included: Yes
Fluid Included: No
Gear Ratio: 3.73

Detailed Fitment Results
Year Make Model Sub Model Body Type Drive Type Bed Length (in) Fitment Notes 1998 Chevrolet Blazer LS / LT / Base 4WD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 1998 GMC Jimmy SLE / SLS / SLT / Envoy / SL 4WD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 1999 Chevrolet Blazer LS / LT / Base / Trailblazer 4WD / AWD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 1999 GMC Jimmy SLE / SLS / SLT / Envoy / SL 4WD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2000 Chevrolet Blazer LS / LT / Trailblazer 4WD / AWD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2000 GMC Jimmy SLE / SLS / SLT / Envoy / Diamond Edition 4WD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2001 Chevrolet Blazer LS / LT / Trailblazer 4WD / AWD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2001 GMC Jimmy SLE / SLS / SLT / Diamond Edition 4WD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2002 Chevrolet Blazer LS 4WD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2003 Chevrolet Blazer LS / ZR2 4WD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2004 Chevrolet Blazer LS / ZR2 4WD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts 2005 Chevrolet Blazer Base / ZR2 4WD Ratio: 3.73; GM 7.6 Inch Ring Gear, Without ZR2, Ratio Option GT4, With G80 Posi Traction, Does Not Include Hubs, Brakes, Backing Plates, Or Axle Shafts