Front Hitch Mount Sprinter Sprinter 2500/3500/3500XD (2019-Up) - Van Compass - 4071

Add function to the front of your 4X4 Sprinter with the Van Compass Front Receiver Hitch. Our front receiver hitch completely replaces the factory bumper under the plastic cover.

This bumper is compatible with adaptive cruise control and parking sensors. If you have these sensors they must be turned off if you have a bike rack or something mounted in the receiver.

All sensors remain in their factory location. Our receiver hitch front bumper retains the side impact protection the factory bumper provides.

It attaches to the (8) 8MM bolts on front of the chassis and (2) 12MM bolts on the bottom, just past the crumple zone of the chassis. This helps to strengthen the mounting of this receiver hitch to ensure the chassis will hold up to heavy loads and the mount will not flex.

This 2 Inch receiver hitch is designed to hold items like bike/motorcycle racks or mount a winch on a receiver tube for vehicle recovery. Constructed from 3/16 Inch steel plate and 1/4 Inch square tube.

The receiver hitch goes through a dual stage powder coating process, with a zinc rich primer is applied and baked on before the final matte black finish. Our front receiver is compatible with the Aluminess front light bar / brush guard for Sprinters.

Features and Benefits:


Our front receiver hitch completely replaces the factory bumper under the plastic cover

Add function to the front of your 4X4 Sprinter with the Van Compass Front Receiver Hitch

If you have these sensors they must be turned off if you have a bike rack or something mounted in the receiver

Our front receiver is compatible with the Aluminess front light bar / brush guard for 2019+ Sprinters

Static Load Capacity: 400 lbs

Our receiver hitch front bumper retains the side impact protection the factory bumper provides

The receiver hitch goes through a dual stage powder coating process, with a zinc rich primer is applied and baked on before the final matte black finish

Constructed from 3/16 Inch steel plate and 1/4 Inch square tube

This 2 Inch receiver hitch is designed to hold items like bike/motorcycle racks or mount a winch on a receiver tube for vehicle recovery

It attaches to the (8) 8MM bolts on front of the chassis and (2) 12MM bolts on the bottom, just past the crumple zone of the chassis

This bumper is compatible with adaptive cruise control and parking sensors

All sensors remain in their factory location

This helps to strengthen the mounting of this receiver hitch to ensure the chassis will hold up to heavy loads and the mount will not flex


Associated Comments:


Hitch Receiver Static Load Capacity: 400 lbs


Details:


Hardware Included: Yes

Recommended Shop Labor Time: 1 Hours

Color: Black

Finish: Powdercoat

Material: Steel

Configuration: One Piece

Mounting Type: Bolt On

Hitch Receiver Static Load Capacity: 400 Pound

Retains Adaptive Cruise Control: Yes

Retains Factory Fog Lights: Yes

Retains Front Parking Sensors: Yes

Attachment Location: Front

Maximum Tongue Weight: 400 Pound

Receiver Included: No

Receiver Size: 2 Inch

Warranty: 60 Days-Finish Limited Lifetime-Structural


Van Compass Front Hitch Mount - Sprinter