4 Inch Coil Spring Lift Kit With Falcon Shocks And Radius Arms 2023-2025 Ford Super Duty F-250/F-350 4WD - ReadyLIFT - 49-23421

ReadyLIFT Suspension is excited to introduce a new Super Duty lift kit, the #49-23421, featuring a 4-Inch Coil Spring Kit with Tubular Radius Arms and Falcon Dual Steering Stabilizer. This kit includes front and rear Falcon 1.1 Monotube series performance shocks, a front track bar relocation bracket, tubular radius arms or radius drops, and rear fabricated blocks.

Super Duty truck owners now have the perfect solution for lifting their trucks to accommodate larger tires, all while enhancing ground clearance and achieving an eye-catching look. This lift height strikes the ideal balance for Super Duty driving dynamics, allowing for maximum tire size while maintaining everyday usability.

The all-new Radius Arms are designed to rectify the suspension geometry on lifted models, providing heavy-duty durability and the ability to withstand the demands of Super Duty trucks. These arms also offer additional tire clearance and allow for the installation of oversized tires with ease, thanks to their inward-formed design.

Installation is a breeze with the direct bolt-on design. The inclusion of Falcon steering dampers in the 49-23421 kit ensures superior truck stability, a critical factor for any solid front axle vehicle equipped with oversized tires.

Falcon steering stabilizers enhance handling on and off the road by reducing bump steer, improving steering feedback, and enhancing overall truck maneuverability and control. This lift kit allows for the use of tires up to 37-Inch tall.

The coil spring kit specially engineered coil springs, combined with Falcon 1.1 shocks and a track bar relocation bracket, significantly improve the Super Duty's ride and handling performance. This kit is not just a lift; it's a performance and ride-enhancing package that will impress consumers with its on-road and off-road capabilities.

Features and Benefits:


Fits 2023-UP Ford Super Duty Power Stroke 4WD

4-Inch Coil Spring Lift Kit

(4) Monotube Falcon 1.1 Shocks

Tubular Radius Arms correct caster angle

Falcon Dual Steering Stabilizer included

Bolton lift kit

No structural modifications required

Allows for up to 37-Inch tall tires on 9-Inch wide wheels with +18 offset

For diesel trucks with rear singlewheel only

Not recommended for 2WD or gas trucks

Note: Tremor versions will not gain the full 4 inches over stock ride height

Single Cab configuration has not been validated for fitment and drivability by ReadyLIFT


Details:


Fitment: Direct Fitment

Front Lift Component: Coil Spring

Front Lift Height: 4.0 Inch

Front Shocks: Falcon 1.1 Monotube

Front or Rear: Front and Rear

Fuel Type: Diesel

Install Difficulty: Difficult Requires Professional Installation

Installation Time: 5+ Hours

Lift Height: 4.0 Inch

Max Tire Size: 37 Inch

Rear Lift Component: Block

Rear Lift Height: 4.0 Inch

Rear Shocks: Falcon 1.1 Monotube

Shocks Included: Yes