Bump Steer Kit - QA1 - BAX106

PRODUCT OVERVIEW Changing suspension components in your 1982-1992 Chevrolet Camaro and Pontiac Firebird (F-body) can sometimes cause bump steer or unwanted toe changes during suspension travel. QA1's easy-to-install Bump Steer Kit corrects this problem. ELIMINATE BUMP STEER Bump steer is caused by misalignment in the suspension geometry leading the wheels to turn slightly in and out as the suspension travels up and down. These direct bolt-in kits allow users to relocate the outer tie rod end lower or higher to match the ride height and angle of the control arms through suspension articulation. EASY BOLT-IN INSTALLATION The included hardware and stud taper ensure an exact fit with the 3rd gen Camaro and Firebird spindle and steering linkage making installation easy. MADE IN THE USA QA1 suspension is proudly made in Lakeville Minnesota. Direct bolt-in design for easy installation; Adjustable outer tie rod end to correct bump steer; Precision fit with 3rd gen f-body spindle and steering linkage; Proudly made in the USA
Brand: QA1
Manufacturer Part Number: BAX106
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
Prop 65 Yes/No: Yes
Title: QA1 Steering Bump Steer Assembly BAX106
UPC: 00806990176325