Aluminum Expansion Tank, Natural, fits Dodge Charger/Challenger 2011-2023 - Mishimoto - MMRT-MOP-11EN

Dodge and Chrysler have put a lot of work into the exteriors of their vehicles especially in recent years. With the positively mean look these cars have one would expect an equally clean look under the hood of the 2011-2023 Dodge Charger Challenger and Chrysler 300C. For the most part it all adds up except for the factory expansion tank. Sticking out like a sore thumb the dull yellow reservoir for your Mopar's coolant diminishes the inWowin factor under the hood. On top of that these plastic bits are notorious for degrading and leaking over time. We here at Mishimoto are determined to inject some style into the engine bay of your Mopar with the Mishimoto 2011-2023 Dodge Charger/Challenger Chrysler 300C Aluminum Expansion Tank. We've eliminated the angry beige plastic look of the stock tank with TIG-welded aluminum exponentially improving on the expansion tank's aesthetics and durability. We've also ditched the need for a sight glass or tube by incorporating a cold-fill line within the internal baffling keeping the sleek exterior design of our tank untouched. The Mishimoto 2011-2023 Dodge Charger/Challenger Chrysler 300C Aluminum Expansion Tank is available in a micro-wrinkle black or a natural finish for easy color matching customization through powder-coating or hydro-dipping. Our expansion tank includes the Mishimoto Lifetime Warranty which ensures you'll never have to see the eyesore that is the stock expansion tank ever again.
100-percent aluminum fully welded construction for maximum durability during repeated temperature transitions
Cold fill tab incorporated into internal baffling to retain sleek exterior design
Available natural finish makes customization easy through powder coating anodizing or hydro dipping
Install Difficulty: 2
OptionLabel: Natural
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2011-2023 Dodge Charger Challenger and Chrysler 300C (See Fitment List)
SellingPoint02: 100-percent aluminum fully welded construction for maximum durability during repeated temperature transitions
SellingPoint03: Cold fill tab incorporated into internal baffling to retain sleek exterior design
SellingPoint04: Available natural finish makes customization easy through powder coating anodizing or hydro dipping
SellingPoint05: Internal baffles keep coolant near overflow port during aggressive driving preventing air entry into coolant system
SellingPoint06: Fits with stock expansion tank cap
SellingPoint07: Available in a micro-wrinkle black powder coating or natural finish
SellingPoint08: Mishimoto Lifetime Warranty
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2011-2023 Chrysler 300C 3.6L/5.7L/6.4L--2011-2014 Dodge Charger/Challenger 3.6L/5.7L/6.4L--2015+ Dodge Charger/Challenger 3.6L/5.7L
TechSpec Chassis Codes: N/A
TechSpec Engine Codes: N/A
TechSpec Fluid Capacity (gal): N/A
TechSpec Height (in): N/A
TechSpec Includes: (1) Aluminum Expansion Tank--Mishimoto Lifetime Warranty
TechSpec Installation Notes: 22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM).
TechSpec Material: 6061 Aluminum
TechSpec Note: Mishimoto does not provide powder coating anodizing or hydro dipping services for this product. Customers who purchase the natural finish must source these services independently.----The natural finish may show some surface imperfections that will not affect powder coating or other customization.
TechSpec Width (in): N/A