Performance Auxiliary Heat Exchanger DSG Cooler, fits 2015+ Volkswagen Audi MQB - Mishimoto - MMRAD-MK7-15A

The VW/Audi MQB platform is the perfect candidate for a sleeper street build or full-blown track monster. Whether it's a VW Mk7/MK8 Golf R Audi 8V S3 or 8S TT 2.0TSi the potential power of the TSI/TFSI engines is incredible. Simple bolt-ons and a tune can net you over 100 horsepower and 120 lb-ft of torque but with great power often comes great heat.All that power requires powerful cooling especially considering the MQB platform vehicles use coolant to cool the engine transmission fluid and oil. Even with up to two auxiliary heat exchangers these vehicles can still see reduced transmission performance and oil temps well above the safe limit after a few laps around the track. Luckily Mishimoto has a solution to keep your MQB VW or Audi cool and keep you on the track longer. The Mishimoto 2015+ VW/Audi MQB Performance Auxiliary Heat Exchanger is the perfect upgrade for your stock auxiliary heat exchanger DSG cooler or both! Our auxiliary cooler increases core volume by 52-percent and coolant capacity by a massive 106-percent over stock. The core of the Mishimoto aux cooler also utilizes louvered fins to effectively circulate air throughout the core and boost fin surface area by 68-percent. The dual-pass design balances flow with cooling performance for maximum efficiency while strutted tubes throughout the core ensure durability through the twists and turns of the road or track. The included stainless-steel stone guard adds even more durability to this 2015+ MQB auxiliary heat exchanger by protecting it against road debris kicked up by the car you're about to overtake. Like all our VW/Audi performance products this 2015+ VW/Audi MQB Performance Auxiliary Heat Exchanger is backed by our Mishimoto Lifetime Warranty for a lifetime of performance.
106-percent increase in coolant capacity over stock heat exchanger
52-percent increase in core volume over stock heat exchanger
Helps maintain safe coolant engine oil and DSG oil temperatures
Drain Plug Thread Size: M12 - 1.5
Core Finish: Uncoated
Drain Plug Included: No
Overall Height: 11.67 IN
Core Height: 8.5 IN
Core Thickness: 1.65 IN
Core Material: Aluminum
Outlet Location: Top Left
Transmission Oil Cooler Included: No
Transmission Oil Cooler Fitting Type: N/A
Radiator Cap Included: No
Core Length: 7.12 IN
Core Row Quantity: 1
Inlet Diameter: 0 IN
Inlet Location: Top Right
Outlet Diameter: 0 IN
Fluid Capacity: 0.07 GA
Down Flow Or Cross Flow Type: Down Flow
Overall Length: 7.87 IN
Overall Width: 4.33 IN
Install Difficulty: 2
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for MQB platform vehicles including Volkswagen Golf R Audi S3 and Audi TT 2.0TSi
SellingPoint02: 106-percent increase in coolant capacity over stock heat exchanger
SellingPoint03: 52-percent increase in core volume over stock heat exchanger
SellingPoint04: Helps maintain safe coolant engine oil and DSG oil temperatures
SellingPoint05: Can be used to replace one or both of the stock MQB auxiliary heat exchangers
SellingPoint06: 68-percent increase in fin surface area over stock heat exchanger
SellingPoint07: Included stainless-steel stone guard protects against road debris
SellingPoint08: Combine with the Mishimoto Performance Radiator for the ultimate cooling package
SellingPoint09: Dual-pass design balances flow and cooling performance for maximum efficiency
SellingPoint10: Louvered fins circulate air throughout the core for improved heat transfer
SellingPoint11: Strutted tubes throughout the core allow it to withstand the twists turns and bumps of the road or track
SellingPoint12: Mishimoto Lifetime Warranty
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2015+ Volkswagen MK7/MK8 Golf R--2013+ Audi 8V/8Y S3--2014+ Audi 8S TT (2.0TSi)
TechSpec Chassis Codes: MQB
TechSpec Core Height (in): 8.5
TechSpec Core Length (in): 7.12
TechSpec Core Thickness (in): 1.65
TechSpec DPI: N/A
TechSpec Drain Plug Thread Size: N/A
TechSpec Engine Codes: N/A
TechSpec Fluid Capacity (gal): 0.07
TechSpec Includes: Mishimoto Performance Auxiliary Heat Exchanger / DSG Cooler-- Stainless-Steel Stone Guard--Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Material: N/A
TechSpec Note: Price listed is for one heat exchanger. Customers who wish to replace both their auxiliary radiator and their DSG cooler must purchase two units.
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): 11.67
TechSpec Overall Length (in): 7.87
TechSpec Overall Width (in): 4.33
TechSpec Rows: 1