Performance Aluminum Radiator, fits Jeep Wrangler JL 2018+ - Mishimoto - MMRAD-JL-18

The Jeep Wrangler is the ultimate do-anything vehicle. It can tackle the trails haul your trailer shuttle the kids to soccer practice commute to work and do it all again tomorrow. It's no wonder the Wrangler is the most popular off-road vehicle for people who have a normal life Monday through Friday; but it's not perfect.----The 2018+ Jeep Wrangler JL has one of the most cramped cooling stacks we've seen in a modern vehicle especially in the 2.0L spec with the additional heat exchanger for the turbo system. That cramped cooling stack means the JL needs an efficient radiator and the stock radiator often falls short. Luckily Mishimoto has developed a performance radiator that makes the most of the cramped space in the front of the JL.----This Mishimoto performance radiator for the 2018+ Jeep Wrangler JL is designed to make the most of every inch of the Wrangler's cooling stack while withstanding the rigors of off-road (and everyday) life. Our radiator features an oversized core that's 51 percent larger than stock with a 38 percent greater coolant capacity to effectively cool your engine even at low speeds. The 37 percent increase in fin surface area and oversized single-row design means that every square inch of core is used to transfer heat away from your engine.----Wranglers are known for their durability and our radiator is built to match. The full-aluminum TIG-welded end tanks are designed to withstand vibration and repeated heat cycles without cracking or leaking. To add even more durability we've constructed the core with extruded and strutted tubes that resist chassis flex on the trail. Like all our Wrangler products this 2018+ Jeep Wrangler JL performance radiator is backed by our Mishimoto Lifetime Warranty making it as dependable as your Jeep.
51 percent increase in core volume for improved cooling efficiency
38 percent larger coolant capacity withstands greater cooling loads
37 percent greater fin surface area for improved heat transfer in cramped cooling stack
Drain Plug Thread Size: M12 - 1.5
Core Finish: Uncoated
Drain Plug Included: Yes
Overall Height: 20.12 IN
Core Height: 19.53 IN
Core Thickness: 1.57 IN
Core Material: Aluminum
Outlet Location: Bottom Right
Transmission Oil Cooler Included: No
Transmission Oil Cooler Fitting Type: N/A
Radiator Cap Included: No
Core Length: 22.91 IN
Core Row Quantity: 1
Inlet Diameter: 0 IN
Inlet Location: Top Left
Outlet Diameter: 0 IN
Fluid Capacity: 0.563 GA
Down Flow Or Cross Flow Type: Cross Flow
Overall Length: 28.75 IN
Overall Width: 6.32 IN
Install Difficulty: 3
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2018+ Jeep Wrangler JL
SellingPoint02: 51 percent increase in core volume for improved cooling efficiency
SellingPoint03: 38 percent larger coolant capacity withstands greater cooling loads
SellingPoint04: 37 percent greater fin surface area for improved heat transfer in cramped cooling stack
SellingPoint05: Strutted tubes reinforce core against chassis flex and vibration
SellingPoint06: TIG-welded aluminum end tanks withstand rough trails without cracking
SellingPoint07: Oversized single-row design utilizes full core depth
SellingPoint08: Removable outlet port for easy installation
SellingPoint09: Patent Pending
SellingPoint10: Mishimoto Lifetime Warranty
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: Jeep Wrangler I4 2.0L Turbo 2018+ --Jeep Wrangler V6 3.6L 2018+--Jeep Wrangler V6 3.0L Turbo 2018+--Jeep Gladiator V6 3.6L 2018+--Jeep Gladiator V6 3.0L Turbo 2018+
TechSpec Chassis Codes: JL--JT
TechSpec Core Height (in): 19.53
TechSpec Core Length (in): 22.91
TechSpec Core Thickness (in): 1.57
TechSpec DPI: 2957
TechSpec Drain Plug Thread Size: M12 X 1.5
TechSpec Engine Codes: 3.6L Pentastar--3.0L EcoDiesel--2.0L Hurricane
TechSpec Fluid Capacity (gal): 0.563
TechSpec Includes: (1) Aluminum Radiator--(1) Coolant Outlet--(1) Coolant Outlet O-ring--(1) M12 X 1.5 Drain Plug--Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Material: 6061-Aluminum
TechSpec Note: Installation on 3.0L Eco diesel models requires significant disassembly of the cooling stack that is not covered in installation instructions and may require trimming of intercooler inlet and outlet to fit
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): 20.12
TechSpec Overall Length (in): 28.75
TechSpec Overall Width (in): 6.32
TechSpec Rows: 1