Universal Oil Cooler, 10-Row, Silver, Thermostatic, Kit - Mishimoto - MMOC-UT

Enthusiasts who push their high-performance cars to the limit understand the importance of keeping their oil temperatures in control to prevent damage or even seizure of the engine.The Mishimoto Universal 10 Row Oil Cooler Kit will extend the life of your engine by ensuring your essential high-wear engine components such as piston rings skirts and cam bearings are sufficiently lubricated with cooler oil.The Mishimoto oil cooler kit is available with an optional thermostatic sandwich plate for safe daily-driver warm up and additional operating temperature control.Included with the purchase of the 10 Row Oil Cooler Kit are high-quality stainless steel braided hose lines and all necessary adapters for universal installation.Offered with either a black or silver cooler the Mishimoto Universal 10 Row Oil Cooler Kit includes a Lifetime Warranty so you know quality is guaranteed!
Universal fitment
10-row stacked-plate cooler withstands high fluid pressures reduces oil temperatures and exhibits minimal pressure loss
Includes either standard or thermostatic billet anodized aluminum sandwich plate
Inlet Outside Diameter: 0 IN
Outlet Outside Diameter: 0 IN
Base Height: 0 IN
Color: Silver
Finish: Anodized
Width: 0 IN
Core Height: 2.76 IN
Core Thickness: 1.97 IN
Core Width: 11 IN
Grade Type: Performance
Core Type: Bar-and-Plate
Inlet Fitting Gender: Male
Outlet Fitting Gender: Male
Core Row Quantity: 0
Fluid Capacity: 0 GA
Core Color: Silver
Inlet Fitting Type: AN Flare
Outlet Fitting Type: AN Flare
Install Difficulty: 3
OptionLabel: Silver Cooler Thermostatic
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Universal fitment
SellingPoint02: 10-row stacked-plate cooler withstands high fluid pressures reduces oil temperatures and exhibits minimal pressure loss
SellingPoint03: Includes either standard or thermostatic billet anodized aluminum sandwich plate
SellingPoint04: Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable leak-free connections
SellingPoint05: Includes 3/4-16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models
SellingPoint06: Available in Sleek Silver or Stealth Black
SellingPoint07: Lifetime Warranty
SellingPoint08: N/A
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: N/A
TechSpec Caution: It is the installer's responsibility to check all thermostat plugs NPT plugs line fittings and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals especially during the first few miles after installation. For additional technical information contact our customer experience team.
TechSpec Chassis Codes: N/A
TechSpec Core Construction: N/A
TechSpec Core Height (in): 2.76
TechSpec Core Length (in): 11
TechSpec Core Thickness (in): 1.97
TechSpec Engine Codes: N/A
TechSpec Fluid Capacity (qts): N/A
TechSpec Includes: 10-Row Oil Cooler--4ft Stainless Steel Braided Hose w/ -10AN fittings--One straight fitting and one 90 degree swivel fitting--5ft stainless Steel Braided Hose w/ -10AN fittings--One straight fitting and one 90 degree swivel fitting--M20 Thermostatic Sandwich Plate---10AN Fittings--Dowty Oil Seals--Large O-Ring--1/8-in NPT Allen Key Plugs--Sandwich plate adapters--Mishimoto Lifetime Warranty
TechSpec Inlet: N/A
TechSpec Installation Notes: Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb
TechSpec Note: No dashes = M20 x 1.5--M20 x 1.5--2 dashes = 3/4 inch -16UNF--3/4 inch -16UNF
TechSpec Outlet: N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Rows: 10