Universal Oil Cooler, 25-Row, Black, Kit - Mishimoto - MMOC-UHBK

Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine.Keep your temperatures in check with the 25-Row Mishimoto Universal Oil Cooler Kit.This kit is applicable for most vehicles and includes all key components for reducing oil temperatures and providing your engine with extra protection against oil degradation.This kit includes a billet anodized aluminum sandwich plate in either standard or thermostatic form.The optional Mishimoto Thermostatic Sandwich Plate provides additional temperature control and will limit oil flow to the cooler until optimal temperatures are reached making it ideal for those in cooler climates.The included core is our proven Mishimoto 25-row stacked-plate cooler which can wIt'stand high fluid pressures and significantly reduce oil temperatures while exhibiting minimal pressure loss.This kit includes both a 3/4-16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models.This kit also includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable leak free connections.Whether you are piloting a boosted rotary or a blown small block the Mishimoto Universal Oil Cooler Kit will provide the efficiency you need to stay on the track and out of the shop.As with all our products this kit includes the Mishimoto Limited Lifetime Warranty.
Universal fitment
25 row stacked plate cooler withstands high fluid pressures reduces oil temperatures and exhibits minimal pressure loss
Includes billet anodized aluminum sandwich plate in either standard or thermostatic form
Inlet Outside Diameter: 0 IN
Outlet Outside Diameter: 0 IN
Base Height: 12.95 IN
Color: Black
Finish: Anodized
Width: 1.97 IN
Core Height: 7.32 IN
Core Thickness: 1.97 IN
Core Width: 11 IN
Grade Type: Performance
Core Type: Bar-and-Plate
Inlet Fitting Gender: Male
Outlet Fitting Gender: Male
Core Row Quantity: 0
Fluid Capacity: 0 GA
Core Color: Black
Inlet Fitting Type: AN Flare
Outlet Fitting Type: AN Flare
Install Difficulty: 3
OptionLabel: Black Cooler Non-Thermostatic
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Universal fitment
SellingPoint02: 25 row stacked plate cooler withstands high fluid pressures reduces oil temperatures and exhibits minimal pressure loss
SellingPoint03: Includes billet anodized aluminum sandwich plate in either standard or thermostatic form
SellingPoint04: Includes pre-assembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable leak free connections
SellingPoint05: Includes both a 3/4-in -16 and M20-1.5 sandwich plate adapter which supports fitment for most makes and models
SellingPoint06: Lifetime Warranty
SellingPoint07: N/A
SellingPoint08: N/A
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: N/A
TechSpec Caution: It is the installer's responsibility to check all thermostat plugs NPT plugs line fittings and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals especially during the first few miles after installation. For additional technical information contact our customer experience team.
TechSpec Chassis Codes: N/A
TechSpec Core Construction: N/A
TechSpec Core Height (in): 7.32
TechSpec Core Length (in): 11
TechSpec Core Thickness (in): 1.97
TechSpec Engine Codes: N/A
TechSpec Fluid Capacity (qts): N/A
TechSpec Includes: 25-Row Oil Cooler--4ft Stainless Steel Braided Hose w/ -10AN fittings--One straight fitting and one 90 degree swivel fitting--5ft Stainless Steel Braided Hose w/ -10AN fittings--One straight fitting and one 90 degree swivel fitting--M20 Thermostatic Sandwich Plate---10AN Fittings--Dowty Oil Seals--Large O-Ring--1/8-in NPT Allen Key Plugs--Sandwich plate adapters--Mishimoto Lifetime Warranty
TechSpec Inlet: N/A
TechSpec Installation Notes: Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb
TechSpec Note: No dashes = M20 x 1.5--M20 x 1.5--2 dashes = 3/4 inch -16UNF--3/4 inch -16UNF
TechSpec Outlet: N/A
TechSpec Overall Height (in): 12.95
TechSpec Overall Length (in): 8.35
TechSpec Overall Width (in): 1.97
TechSpec Rows: 25