Oil Cooler Kit, Silver, Thermostatic, fits Toyota GR Corolla 2023+ - Mishimoto - MMOC-GRC-23TSL

The 2023+ Toyota GR Corolla is a track weapon for the modern world. Combining the practicality of a hatchback the fuel efficiency of a 3-cylinder 1.6L engine and 300 horsepower the GR Corolla can do it all. Toyota's Gazoo Racing department didn't hold back when they designed the GR Corolla but they did leave a little room for improvement.----Any time you're pushing 100 HP per cylinder the engine is going to be producing a lot of heat. For the GR Corolla that heat rears its head in the form of high oil temperatures. The fast spinning turbo and high 10.5:1 compression ratio means the oiling system is doing a lot of heavy lifting and that results in oil temps soaring over 260 degrees for some. To help cool the GRC's spunky engine Mishimoto has developed a performance oil cooler kit fit for the Gazoo Racing spirit.----Our 2023+ GR Corolla oil cooler kit includes everything you need to get your GRC's oil temps under control. This kit mounts our 14-row dual-pass bar-and-plate oil cooler in the upper grille using direct-fit brackets. This allows more airflow to the cooler and provides a dyno-proven 13-degree average reduction in oil temps. This kit also adds 0.76 quarts of oil to the system so you can stay on the throttle longer without driving up your oil temps. We've included pre-assembled black nylon-sheathed -10AN braided stainless-steel lines to make installation easy and provide ample flow to critical engine components. The Mishimoto GR Corolla performance oil cooler kit is available with a thermostatic oil filter sandwich plate for daily drivers or cold climates or with a non-thermostatic sandwich plate for dedicated track cars or those in hot environments. Like all Mishimoto products this oil cooler kit is backed by our Mishimoto Lifetime Warranty so you can pin the throttle with confidence knowing we have your GR Corolla's back.
Reduces oil temperatures by an average of 13 degrees
Adds 0.76 qts of oil to system for increase cooling efficiency
Dual-pass 14 row oil cooler adds significant cooling capability
Inlet Outside Diameter: 0.625 IN
Outlet Outside Diameter: 0.625 IN
Base Height: 0 IN
Color: Silver
Finish: Anodized
Width: 0 IN
Core Height: 6.3 IN
Core Thickness: 1.57 IN
Core Width: 12.48 IN
Grade Type: Performance
Core Type: Bar-and-Plate
Inlet Fitting Gender: Male
Outlet Fitting Gender: Male
Core Row Quantity: 0
Fluid Capacity: 0.76 GA
Core Color: Silver
Inlet Fitting Type: AN Flare
Outlet Fitting Type: AN Flare
Install Difficulty: 3
OptionLabel: Thermostatic Silver Cooler
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2023+ Toyota GR Corolla
SellingPoint02: Reduces oil temperatures by an average of 13 degrees
SellingPoint03: Adds 0.76 qts of oil to system for increase cooling efficiency
SellingPoint04: Dual-pass 14 row oil cooler adds significant cooling capability
SellingPoint05: Pre-assembled -10AN lines and fittings ensure ample flow at high RPM
SellingPoint06: Includes nylon-sheathed stainless-steel braided lines for high pressure tolerance and durability
SellingPoint07: Bar-and-plate oil cooler is strong and durable enough for street or track use
SellingPoint08: Direct-fit brackets make installation easy without drilling into body
SellingPoint09: Anti-vibration mounting grommets protect oil cooler over harsh road conditions
SellingPoint10: Available with thermostatic sandwich plate for daily drivers or non-thermostatic for dedicated race cars or hot environments
SellingPoint11: Includes everything needed for installation
SellingPoint12: Mishimoto Lifetime Warranty
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: Toyota GRC Corolla I3 1.6L 2023+
TechSpec Caution: N/A
TechSpec Chassis Codes: GZEA14
TechSpec Core Construction: Bar-and-Plate
TechSpec Core Height (in): 6.3
TechSpec Core Length (in): 12.48
TechSpec Core Thickness (in): 1.57
TechSpec Engine Codes: G16E-GTS
TechSpec Fluid Capacity (qts): 0.76
TechSpec Includes: (1) Mishimoto Dual-Pass Oil Cooler--(2) -10AN Nylon-Sheathed Braided Stainless-Steel Lines--(2) Mounting Brackets--(1) Mishimoto Oil Filter Sandwich Plate--(2) Sandwich Plate Fittings--(1) Sandwhich Plate Center Bolt--Mounting Hardware--2 inchx12 inch Heat Protection Wrap--Mishimoto Lifetime Warranty
TechSpec Inlet: 10AN
TechSpec Installation Notes: Minor modification of the radiator shroud is required. See installation instructions for more details.
TechSpec Note: N/A
TechSpec Outlet: 10AN
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Rows: 14