Oil Cooler, Silver, fits BMW G8X M2/M3/M4 2021+ - Mishimoto - MMOC-G80-21SL

Keep your 2021+ BMW M2/M3/M4 cool and collected with the Mishimoto 2021+ BMW M2/M3/M4 performance oil cooler. Much like their predecessors the G8X M2 M3 and M4 were designed with efficiency in mind. This can be a double-edged sword as the optimally arranged engine bay has components placed in precarious positions. Most notably the oil cooler is placed on the undercarriage parallel to the road's surface. This placement increases air flow and uses aerodynamics to pull air through the core but it also makes the stock cooler vulnerable to scrapes bumps and other road hazards. --With this in mind the engineers at Mishimoto set out to design a robust G8X oil cooler to keep your M3 or M4 running cool on and off the track. We started by swapping the stock tube-and-fin cooler for a bar-and-plate with CNC-machined end tanks. Our cooler boasts a 35.7-percent thicker core and a 41-percent increase in core volume for superior cooling efficiency. Our cooler fits directly in place of the stock unit and retains the stock seals and bash guards for optimal airflow and additional protection.--The Mishimoto performance oil cooler for the 2021+ BMW G8X M2/M3/M4 includes everything needed for installation and as with all Mishimoto products it's protected by the Mishimoto Lifetime Warranty for a lifetime of protection and cooling.
Full aluminum TIG-welded construction
Inlet Outside Diameter: 0 IN
Outlet Outside Diameter: 0 IN
Color: Silver
Finish: Anodized
Core Height: 6.24 IN
Core Thickness: 1.5 IN
Core Width: 25 IN
Grade Type: Performance
Core Type: Bar-and-Plate
Inlet Fitting Gender: Male
Outlet Fitting Gender: Male
Core Row Quantity: 0
Fluid Capacity: 1.3 GA
Core Color: Silver
Inlet Fitting Type: AN Flare
Outlet Fitting Type: AN Flare
Install Difficulty: N/A
OptionLabel: Silver
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2021+ BMW G8X M2/M3/M4
SellingPoint02: Full aluminum TIG-welded construction
SellingPoint03: 41-percent increase in core volume and 35.7-percent thicker core than stock for improved cooling efficiency
SellingPoint04: Robust bar-and-plate core provides superior pressure tolerance and durability
SellingPoint05: Retains stock seals for optimal air flow from fresh air ducts
SellingPoint06: Retains bash guards to protect cooler from bumps and curbs
SellingPoint07: Silver powder coated finish for maximum corrosion resistance
SellingPoint08: No cutting or modifications required
SellingPoint09: Includes everything needed for installation
SellingPoint10: U.S. Patent #D1 040 704 S
SellingPoint11: Mishimoto Lifetime Warranty
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: BMW M2 I6 3.0L Twin-Turbo 2023+--BMW M3 I6 3.0L Twin-Turbo 2021+--BMW M3 Competition I6 3.0L Twin-Turbo 2021+--BMW M4 I6 3.0L Twin-Turbo 2021+--BMW M4 Competition I6 3.0L Twin-Turbo 2021+--
TechSpec Caution: N/A
TechSpec Chassis Codes: G80--G82--G83--G87
TechSpec Core Construction: Tube-and-Fin
TechSpec Core Height (in): 6.24
TechSpec Core Length (in): 25
TechSpec Core Thickness (in): 1.5
TechSpec Engine Codes: S58B30T0
TechSpec Fluid Capacity (qts): 1.3 qts
TechSpec Includes: (1) Mishimoto Performance Oil Cooler--(2) Replacement O-Rings--Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Inlet: N/A
TechSpec Installation Notes: It is the installer's responsibility to check all thermostat plugs NPT plugs line fittings and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals especially during the first few miles after installation.
TechSpec Note: N/A
TechSpec Outlet: N/A
TechSpec Rows: 14