Oil Cooler, Silver, fits BMW F8X M3/M4 2015-2020 - Mishimoto - MMOC-F80-15

Add some much needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler. True to form the engineers at BMW designed the M3/M4's oil cooler with an efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack this location utilizes the Bimmer's aerodynamics in order to cool the oil all while putting the light weight tube-and-fin cooler in harms way of road hazards. We here at Mishimoto made sure to beef up the oil cooler design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris keeping your oil temps down and where It'should be. We also added 10mm to the core?s thickness equating in a 46-percent increase in core volume and increased the oil capacity by .4 qt. The Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler fits directly in place of the stock unit and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.
Full aluminum TIG-welded construction
46-percent increase in core volume
Increases oil capacity by .44 quarts
Inlet Outside Diameter: 0 IN
Outlet Outside Diameter: 0 IN
Base Height: 7 IN
Color: Silver
Finish: Anodized
Width: 1.6 IN
Core Height: 0 IN
Core Thickness: 0 IN
Core Width: 0 IN
Grade Type: Performance
Core Type: Bar-and-Plate
Inlet Fitting Gender: Male
Outlet Fitting Gender: Male
Core Row Quantity: 0
Fluid Capacity: 1.13 GA
Core Color: Silver
Inlet Fitting Type: AN Flare
Outlet Fitting Type: AN Flare
Install Difficulty: 2
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2015-2020 BMW F8X M3 M4 and M2 Competition
SellingPoint02: Full aluminum TIG-welded construction
SellingPoint03: 46-percent increase in core volume
SellingPoint04: Increases oil capacity by .44 quarts
SellingPoint05: Robust bar-and-plate construction for improved durability and heat rejection
SellingPoint06: Silver powder-coated finish for maximum protection
SellingPoint07: No cutting or modifications required
SellingPoint08: Mishimoto Lifetime Warranty
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2015-2018 BMW M3 Sedan--2015-2020 BMW M4 Coupe--2015-2020 BMW M4 Convertible--2016 BMW M4 GTS Coupe--2019-2020 BMW M4 CS Coupe--2019-2020 BMW M2 Competition--2020+ BMW X3 M--2020+ BMW X4 M
TechSpec Caution: N/A
TechSpec Chassis Codes: F80--F82--F83--F87
TechSpec Core Construction: N/A
TechSpec Core Height (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Engine Codes: S55
TechSpec Fluid Capacity (qts): 1.13
TechSpec Includes: Performance Oil Cooler--Replacement O-Rings--Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Inlet: N/A
TechSpec Installation Notes: N/A
TechSpec Note: Fits X3/X4 M only.
TechSpec Outlet: N/A
TechSpec Overall Height (in): 7
TechSpec Overall Length (in): 29.2
TechSpec Overall Width (in): 1.6
TechSpec Rows: 15