Replacement Oil Cooler, fits Ford 6.0L Powerstroke 2003-2007 - Mishimoto - MMOC-F2D-03

Oil is the lifeblood of an engine and in a hardworking diesel engine like the 2003--2007 6.0L Powerstroke keeping that oil cool is essential to the engine's health and running. The stock 2003--2007 Powerstroke liquid-to-liquid oil cooler uses engine coolant to draw heat away from the oil and vent it through the engine radiator. It's a stout design that typically performs well for daily driven trucks. However after over 12 years of service many of those stock coolers have seen better days. A clogged or leaking oil cooler can reduce the oil's ability to transfer heat to the coolant causing thinning and a loss of protection for critical engine components. That's why Mishimoto is proud to offer a stock replacement 2003--2007 Ford 6.0L Powerstroke oil cooler. This replacement cooler complete with new seals and o-rings will restore your 6.0L Powerstroke's oil cooling and protect your engine from unnecessary wear. This cooler is a direct fit and provides all the cooling a daily driven 6.0L needs at an affordable price point. For even more protection check out our 2003--2007 Ford 6.0L Powerstroke Coolant Filter Kit and 6.0L Catch Can Kit. Like all Mishimoto 6.0L Powerstroke products this stock replacement oil cooler is backed by our Mishimoto Lifetime Warranty for a lifetime of worry-free driving.
Replaces clogged or leaking stock oil cooler for renewed performance
Included high-quality FKM seals and O-rings ensure a leak-free fit
Combine with the Mishimoto 2003-2007 6.0L Powerstroke Coolant Filter Kit to help protect your new oil cooler from cooling system debris
Inlet Outside Diameter: 0 IN
Outlet Outside Diameter: 0 IN
Base Height: 0 IN
Color: Silver
Finish: Anodized
Width: 0 IN
Core Height: 0 IN
Core Thickness: 0 IN
Core Width: 0 IN
Grade Type: Performance
Core Type: Bar-and-Plate
Inlet Fitting Gender: Male
Outlet Fitting Gender: Male
Core Row Quantity: 0
Fluid Capacity: 0 GA
Core Color: Silver
Inlet Fitting Type: AN Flare
Outlet Fitting Type: AN Flare
Install Difficulty: 5
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2003-2007 Ford 6.0L Powerstroke
SellingPoint02: Replaces clogged or leaking stock oil cooler for renewed performance
SellingPoint03: Included high-quality FKM seals and O-rings ensure a leak-free fit
SellingPoint04: Combine with the Mishimoto 2003-2007 6.0L Powerstroke Coolant Filter Kit to help protect your new oil cooler from cooling system debris
SellingPoint05: Mishimoto Lifetime Warranty
SellingPoint06: N/A
SellingPoint07: N/A
SellingPoint08: N/A
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2003-2007 Ford 6.0L Powerstroke
TechSpec Caution: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Construction: N/A
TechSpec Core Height (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Engine Codes: N/A
TechSpec Fluid Capacity (qts): N/A
TechSpec Includes: Mishimoto Stock Replacement Oil Cooler--EGR Cooler Supply Cover Gasket--Oil Filter Base O-Rings--Oil Filter Base Gaskets--Oil Cooler Gasket--Oil Cooler O-Rings--Oil Pump Inlet Strainer--Mishimoto Lifetime Warranty
TechSpec Inlet: N/A
TechSpec Installation Notes: N/A
TechSpec Note: Professional installation of this product is highly recommended. Please see factory service manual for removal and installation instructions.----Many oil cooler failures are caused by clogged coolant passages. These clogs prevent heat transfer between the oil and coolant. Mishimoto recommends flushing the vehicle’s coolant when replacing the oil cooler and installing a coolant filter kit to prevent future clogging.
TechSpec Outlet: N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Rows: N/A