Air-to-Water Intercooler, Silver, fits Polaris RZR XP Turbo 2016-2024 - Mishimoto - MMINT-RZR-16

Much like its name suggests the 2016-2024 Polaris RZR XP Turbo is a sharp piece of machinery ready for the track or trail. Unfortunately it is not without its flaws. Even on stock set ups the OEM tube-and-fin intercooler is prone to cracking at the plastic end tanks. If you're lucky this can lead to a decrease in performance; but with gallons of coolant running through the intercooler the chances of destroying the engine are too high for us. ---- The engineers at Mishimoto have developed a resilient direct-fit intercooler to combat this critical factory flaw and keep your RZR XP Turbo running razor-sharp. Its bar-and-plate core was developed to stand up to the vibration and shock load your RZR Turbo might be subjected to while out on the trail bog rocks or dunes. Our intercooler end tanks are CNC-machined from aircraft-grade aluminum then precision TIG-welded unlike the unreliable plastic found in the OEM cooler making it resistant to cracks and leaks. As with all our products the Mishimoto Intercooler for the 2016-2024 Polaris RZR XP Turbo is backed by our signature Mishimoto Lifetime Warranty. If you're worried about keeping your RZR sharp treat it to our bar-and-plate intercooler so you can ride with peace of mind.
Dual-pass bar-and-plate core provides greater durability and heat soak resistance than stock
N/A
Billet-aluminum CNC-machined end and top plates won't crack like stock plastic parts
Inlet Outside Diameter: 0 IN
Outlet Outside Diameter: 0 IN
Length: 0 IN
Width: 0 IN
Type: Bar-and-Plate
Core Height: 6.65 IN
Core Thickness: 4.35 IN
Core Material: Aluminum
Height: 0 IN
Universal Or Specific Fit: Specific
Grade Type: Performance
Inlet Fitting Gender: Male
Outlet Fitting Gender: Male
Core Length: 10.73 IN
Inlet Tank Material: Aluminum
Core Color: Silver
Install Difficulty: N/A
OptionLabel: N/A
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2016-2024 Polaris RZR XP Turbo
SellingPoint02: Dual-pass bar-and-plate core provides greater durability and heat soak resistance than stock
SellingPoint03: Billet-aluminum CNC-machined end and top plates won't crack like stock plastic parts
SellingPoint04: Robust TIG-welded end tanks eliminate potential leak points
SellingPoint05: Helps prevent engine damage due to coolant leaks into the intake
SellingPoint06: Compatible with stock coolant hoses without cutting or modifications
SellingPoint07: Pair with the Mishimoto Silicone Intake J-Tube to improve airflow to your intercooler
SellingPoint08: Mishimoto Lifetime Warranty
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: N/A
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Height (in): 6.65
TechSpec Core Length (in): 10.73
TechSpec Core Thickness (in): 4.35
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (1) Mishimoto Performance Intercooler--Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: Reuses factory gasket with modifications
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: It is the installer's responsibility to check all coolant lines and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals especially during the first few miles after installation.
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): 4.75