Intercooler Kit, Silver/Silver, fits Mitsubishi Lancer Evo X 2008-2015 - Mishimoto - MMINT-EVO-10KSL

A high-horsepower Evo demands an intercooler setup that provides optimal airflow and a cool dense charge of air. Modified vehicles running high boost pressures often have increased air intake temperatures (AITs) and heat soak both of which can result in diminished performance. Keep your intake temperatures under control with the Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler kit. This intercooler kit is a direct bolt-on unit engineered specifically for the Evo X. Thanks to an efficient 3.5-inch thick bar-and-plate core this intercooler provides optimal heat dissipation and low AITs. The robust cast aluminum end tanks provide superior durability and smooth uninterrupted airflow. The intercooler core is a strategic fin design that promotes substantial heat exchange while providing minimal pressure loss across the core. This kit also features polished 2.5-inch mandrel-bent aluminum piping and four-layer 100-percent silicone couplers with heat-resistant embedded fibers. These couplers offer increased heat and pressure tolerance compared to the factory rubber connections. Dependable charge-air connections are essential for reliable operation. The Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit includes high-quality stainless steel T-bolt clamps for each connection. These clamps provide the holding power you need for increased boost pressures! The Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler kit provides a dyno-proven increase of 10 whp and 10 tq and it will support modified vehicles up to 600 whp! Whether you are making a pass at the drag strip or sliding around a rally stage this intercooler kit will provide the cooling that your engine needs to perform at its best. This intercooler is available with a powder-coated finish in Sleek Silver or Stealth Black. As with all our products this intercooler kit includes the Mishimoto Lifetime Warranty ensuring superior product quality and craftsmanship.
10 whp and 10 tq bolt-on power increase
Efficient 3.5-in thick bar-and-plate core provides optimal heat dissipation and low AITs
Full aluminum cast end tanks provide increased durability and smooth uninterrupted airflow
End Tank Material: Aluminum
Pipe Finish: Powder Coated
Hot Side Pipe Inside Diameter: 2.375 IN
Cold Side Pipe Inside Diameter: 2.5 IN
Intercooler Type: Air-to-Air
Core Construction: Bar-and-Plate
End Tank Construction: Cast
Core Height: 12 IN
Core Thickness: 0 IN
Core Material: Aluminum
Universal Or Specific Fit: Specific
Grade Type: Performance
Pipe Material: Aluminum
Pipe Color: Silver
Core Length: 19.5 IN
Inlet Diameter: 2.375 IN
Coupler Color: Black
Coupler Material: Silicone
Hose Clamps Included: Yes
Outlet Diameter: 2.5 IN
Maximum Boost Pressure: 0 PS
Core Color: Silver
Maximum Horsepower: 0 HJ
Install Difficulty: 3
OptionLabel: Silver
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2008-2015 Mitsubishi Lancer Evolution X
SellingPoint02: 10 whp and 10 tq bolt-on power increase
SellingPoint03: Efficient 3.5-in thick bar-and-plate core provides optimal heat dissipation and low AITs
SellingPoint04: Full aluminum cast end tanks provide increased durability and smooth uninterrupted airflow
SellingPoint05: Strategically designed fins for minimal pressure loss
SellingPoint06: Substantial core volume will support vehicles up to 600 whp
SellingPoint07: Available with a powder-coated finish in Sleek Silver or Stealth Black
SellingPoint08: Mishimoto Lifetime Warranty
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: N/A
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: CZ4A
TechSpec Core Height (in): 12
TechSpec Core Length (in): 19.5
TechSpec Core Thickness (in): N/A
TechSpec Core Type: Bar-and-Plate
TechSpec Engine Codes: 4B11T
TechSpec Includes: (1) Mishimoto Intercooler--CNC Mounting Pegs--Mishimoto Lifetime Warranty
TechSpec Inlet (in): 2.375
TechSpec Installation Notes: N/A
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: This intercooler can be used with stock or aftermarket intercooler pipes. The CNC mounting pegs must be installed by the customer.
TechSpec Outlet (in): 2.5
TechSpec Overall Height (in): 13.7
TechSpec Overall Length (in): 28.3
TechSpec Overall Width (in): 4.5
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): 23