Performance Charge Pipe Kit, Red, fits Toyota GR Supra 3.0L 2020+ - Mishimoto - MMICP-SUP-20RD

Whether your 2020+ Toyota GR Supra is bone stock or sending massive power to the pavement via an upgraded turbo your B58 needs to breathe. The stock plastic charge pipe fitted between the turbocharger and the intake manifold is adequate for daily driving but the GR Supra was built for more than just the daily commute and hauling groceries. If you want to get the most performance out of your Supra it's time to ditch the restrictive plastic charge pipe and upgrade to Mishimoto's performance aluminum charge pipe.This Mishimoto performance aluminum charge pipe for the 2020+ Toyota GR Supra replaces your stock fragile plastic charge pipe with a free-flowing 3in aluminum version that's guaranteed to last the lifetime of your Supra. Our design removes the kinks and pinched sections of the stock pipe in favor of smooth flowing curves. We've also designed our couplers and flanges to transition seamlessly from one component to the next. All of this adds up to a charge pipe that outflows stock by up to 42-percent.Our performance charge pipe is constructed from two mandrel-bent aluminum pipes with CNC-machined flanges for ease of installation maximized durability and perfect fitment. Two pre-installed bungs can be drilled and tapped for boost pressure sensors or methanol injection. The included coupler is made from five layers of silicone with embedded heat-resistant fibers and are reinforced with steel wire to prevent ballooning under high boost pressures. This charge pipe kit is a direct fit with no other modifications required and includes constant-tension worm gear clamps for reliable performance. Like all Mishimoto GR Supra products this is backed by our lifetime warranty for a lifetime of performance.
Reduces restriction by up to 42-percent over stock pipe
3-in mandrel-bent piping with internal transitions for reduced turbulence and improved flow
Precision CNC-machined adapters for smooth flow and secure fit
Clamp Type: Worm Gear
Hot Side Pipe Inside Diameter: 0 IN
Cold Side Pipe Inside Diameter: 0 IN
Clamps Included: Yes
Finish: Powder Coated
Pipe Material: Aluminum
Pipe Color: Red
Clamp Quantity: 2
Coupler Color: Black
Coupler Material: Silicone
Pipe Quantity: 2
Pipe Bend Type: Mandrel
Install Difficulty: 2
OptionLabel: Wrinkle Red
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2020+ Toyota GR Supra w/B58 engine
SellingPoint02: Reduces restriction by up to 42-percent over stock pipe
SellingPoint03: 3-in mandrel-bent piping with internal transitions for reduced turbulence and improved flow
SellingPoint04: Precision CNC-machined adapters for smooth flow and secure fit
SellingPoint05: Included coupler is constructed with steel wire reinforcement to prevent ballooning under high boost pressures
SellingPoint06: Two pre-installed bungs can be drilled and tapped for boost sensors nitrous or methanol injection
SellingPoint07: Two-piece design for a perfect fit and easy installation
SellingPoint08: Includes constant-tension worm gear clamps for reliable performance
SellingPoint09: Available in micro-wrinkle black or wrinkle red powder coated finish
SellingPoint10: Mishimoto Lifetime Warranty
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2020+ Toyota Supra 3.0L
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: A90--GR
TechSpec Core Height (in): 9.25
TechSpec Core Length (in): 22
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: B58
TechSpec Includes: (2) Mandrel-Bent Aluminum Charge Pipes--(1) Silicone Coupler w/ Steel Wire Reinforcement--(2) Constant-Tension Worm Gear Clamps--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 22 in-lbs (2.5NM) recommended for all worm gear clamps. These clamps have an operating range of 18-27 in-lbs (2-3NM). Do not exceed the maximum torque rating of 27 in-lbs (3NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: The stock O-rings and spring clip must be transferred from the stock pipe. If needed the O-rings and spring clip can be sourced from Toyota with the following part numbers: 17376WAA05 17376WAA04 90118WA186
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A