Intercooler Pipe Kit, Polished, fits Ford Ranger 2.3L 2019-2023 - Mishimoto - MMICP-RGR-19KP

The 2019-2023 Ford Ranger 2.3L EcoBoost is one of the most capable small trucks on the planet. With its direct-injected and turbocharged engine producing 310 lb-ft of torque the 2019-2023 Ranger combines efficiency with capability. The 2.3L EcoBoost engine under the hood of the Ranger produces plenty of power to let you roam free but what if you want more? Adding a tune and more boost is a great way to squeeze more power from the Ranger but the stock intercooler pipes can only handle so much boost. That's why Mishimoto has developed this aluminum intercooler pipe and boot kit for the 2019-2023 Ford Ranger 2.3L EcoBoost.Our all-aluminum intercooler pipes are constructed of mandrel-bent aluminum with a polished or micro-wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe allowing for up to 25-percent better flow and dyno-proven max gains of 9.7 wheel horsepower and 9 lb-ft of torque when combined with Mishimoto intercooler pipes. The Mishimoto intercooler pipes are also larger than stock with a 19.86-percent increase in volume to let your turbo breathe easy.This kit includes Mishimoto Silicone Boots with DuraCore(TM) technology. Mishimoto DuraCore technology is a synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to standard silicone DuraCore(TM) provides superior resistance to heat pressure fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto high-torque worm gear clamps for consistent holding power.Like all our Ranger products this 2019-2023 Ford Ranger 2.3 EcoBoost Intercooler Pipe and Boot Kit is a direct fit and is backed by our Mishimoto Lifetime Warranty.
Dyno-proven max gains of 9.78 hp and 9 ft-lbs of torque
Improves flow by 25.6-percent on the hot side and 16.6-percent on the cold side
Increases internal volume by 26.4-percent on the hot side and 13.7-percent on the cold side for more power potential
Clamp Type: Worm Gear
Hot Side Pipe Inside Diameter: 0 IN
Cold Side Pipe Inside Diameter: 0 IN
Clamps Included: Yes
Finish: Powder Coated
Pipe Material: Aluminum
Pipe Color: Black
Clamp Quantity: 6
Coupler Color: Black
Coupler Material: Silicone
Pipe Quantity: 2
Pipe Bend Type: Mandrel
Install Difficulty: 2
OptionLabel: Polished
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2019-2023 Ford Ranger 2.3L EcoBoost
SellingPoint02: Dyno-proven max gains of 9.78 hp and 9 ft-lbs of torque
SellingPoint03: Improves flow by 25.6-percent on the hot side and 16.6-percent on the cold side
SellingPoint04: Increases internal volume by 26.4-percent on the hot side and 13.7-percent on the cold side for more power potential
SellingPoint05: Mandrel-bent aluminum pipes eliminate restrictive bends
SellingPoint06: Cold-side pipe includes bung that can be drilled and tapped for a sensor or boost gauge
SellingPoint07: Includes Mishimoto Silicone Boots with DuraCore Technology
SellingPoint08: Available in polished or micro-wrinkle black powder-coated finish
SellingPoint09: Includes high-torque worm gear clamps
SellingPoint10: Mishimoto Lifetime Warranty
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2019-2023 Ford Ranger 2.3L EcoBoost
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: T6
TechSpec Core Height (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (1) Aluminum Hot-Side Intercooler Pipe--(1) Aluminum Cold-Side Intercooler Pipe--(1) CNC-Machined Aluminum Hot-side Pipe Adapter--(2) DuraCore Hot-Side Couplers--(1) DuraCore Cold-Side Coupler--(6) High-Torque Worm Gear Clamps--Bypass Valve Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 22 in-lbs (2.5NM) recommended for all worm gear clamps. These clamps have an operating range of 18-27 in-lbs (2-3NM). Do not exceed the maximum torque rating of 27 in-lbs (3NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: N/A
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): 5