Intercooler Pipe Kit, Black, fits Dodge 6.7L Cummins 2010-2012 - Mishimoto - MMICP-RAM-10BK

Mishimoto has developed an intercooler pipe and boot kIt'specifically engineered for use on the 2010-2012 Dodge 6.7L Cummins. After investigating the pipe routing and size our engineers identified numerous areas where improvement was necessary. The Mishimoto intercooler pipes are constructed of mandrel bent aluminum routed in a way that eliminates restrictive bends present in the factory pipes. Along with this we increased the pipe diameter from 3in to 3.5in to provide substantial improvements in power airflow and EGTs. Mishimoto DuraCore boots and constant-tension T-bolt clamps are also included in this kit. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone DuraCore provides superior resistance to heat pressure fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The Mishimoto Dodge 6.7L Cummins intercooler piping and boot kit is designed to work with our performance intercooler. The kit is made in the USA and includes the Mishimoto lifetime warranty.
Replaces weak factory plastic cold-side pipe
Replaces small diameter hot-side pipe
Improves airflow power and EGTs
Clamp Type: T-Bolt
Hot Side Pipe Inside Diameter: 0 IN
Cold Side Pipe Inside Diameter: 0 IN
Clamps Included: Yes
Finish: Polished
Pipe Material: Aluminum
Pipe Color: Polished
Clamp Quantity: 8
Coupler Color: Black
Coupler Material: Silicone
Pipe Quantity: 2
Pipe Bend Type: Mandrel
Install Difficulty: N/A
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2010-2012 Dodge 6.7L Cummins (with Mishimoto Performance Intercooler)
SellingPoint02: Replaces weak factory plastic cold-side pipe
SellingPoint03: Replaces small diameter hot-side pipe
SellingPoint04: Improves airflow power and EGTs
SellingPoint05: Installs in under two hours
SellingPoint06: No additional tuning required
SellingPoint07: Includes Mishimoto Silicone Boots with DuraCore technology and Mishimoto Constant-Tension T-bolt Clamps
SellingPoint08: Mishimoto Lifetime Warranty
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2010-2012 Dodge Ram 2500 w/ 6.7L Cummins Engine--2010-2012 Dodge Ram 3500 w/ 6.7L Cummins Engine--2010-2012 Dodge Chassis Cab w/ 6.7L Cummins Engine
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Height (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (2) Aluminum Pipes--(4) Silicone Boots with Duracore Technology--(8) Constant-Tension T-Bolt Clamps--(2) Aluminum Mishimoto M Logo Badges--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: N/A
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: Only fits with Mishimoto Dodge 6.7L Cummins Performance Intercooler
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A