Intercooler Pipe Kit, Polished, fits Ford Focus ST 2013-2018 - Mishimoto - MMICP-FOST-13KP

Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto Performance Intercooler Piping Kit. The piping equipped on the 2.0L EcoBoost engine from the factory is riddled with bends restrictive piping diameters and degradation-prone materials all of which slow the air to and from your intercooler putting a strain on the FOST?s performance. We here at Mishimoto strive to free the flow of the charged air in your sporty Focus. To start we removed the turbo muffler from the design of the hot-side stock piping and reduced the amount of bends giving the airflow a more direct flow from the turbo to the intercooler. On top of the reduction of bends we increased the inner diameter of the piping to 2.5 inches of high-grade aluminum allowing for a 14-percent increase in volume and 26-percent greater flow over the stock equipment. The stock rubber connections have also been replaced with sturdy silicone couplers to ensure solid connection between piping and intercooler. The improvements don't stop with the hot-side piping. The cold-side piping received an overhaul as well replacing the degradation-prone rubber construction with 5 layers of durable silicone complete with heat-resistant fibers ensuring that the cold-side airflow stays cool. For added support the single section of piping is reinforced with steel wire ensuring that it keeps its shape under heavy load. Speaking of shape the Mishimoto Performance Cold-Side Intercooler Pipe features an elliptical shape to accommodate the increased size of the Mishimoto Performance Radiator. The result of adding the Mishimoto full Performance Intercooler and Piping kit to your 2013-2018 Focus ST in conjunction with the Mishimoto Performance intake is a 21-percent increase in flow of the charged air through the system and an additional 8hp and 10ft/lb of torque boost on top of intake and intercooler gains on the stock tune.
8 hp/ 10 tq gains when combined with other Mishimoto Focus ST parts
14-percent increase in volume over stock hot side pipe
10-percent increase in volume over stock cold side pipe
Clamp Type: Worm Gear
Hot Side Pipe Inside Diameter: 0 IN
Cold Side Pipe Inside Diameter: 0 IN
Clamps Included: Yes
Finish: Polished
Pipe Material: Aluminum
Pipe Color: Polished
Clamp Quantity: 6
Coupler Color: Black
Coupler Material: Silicone
Pipe Quantity: 2
Pipe Bend Type: Mandrel
Install Difficulty: 3
OptionLabel: Polished
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2013-2018 Ford Focus ST
SellingPoint02: 8 hp/ 10 tq gains when combined with other Mishimoto Focus ST parts
SellingPoint03: 14-percent increase in volume over stock hot side pipe
SellingPoint04: 10-percent increase in volume over stock cold side pipe
SellingPoint05: 21-percent increase in flow over stock piping
SellingPoint06: Elliptical shape cold-side pipe to accommodate for larger Mishimoto radiator
SellingPoint07: Mandrel-bent aluminum hot-side piping
SellingPoint08: Available in polished or wrinkle black
SellingPoint09: Mishimoto Lifetime Warranty
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: Ford Focus ST 2013-2018
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Height (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (1) Aluminum Intercooler Pipe--(1) Silicone Pipe--(2) Silicone Couplers--(6) High-Torque Worm Gear Clamps--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: N/A
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A