MMICP-FOST-13C Intercooler Pipe Kit, Black, Cold-side, fits Ford Focus ST 2013-2018 - Mishimoto - MMICP-FOST-13CBK

Increase the flow of charged air from the intercooler in your 2013-2018 Ford Focus ST with the Mishimoto performance cold-side intercooler pipe. The piping included from the factory is constructed from rubber which not only degrades over time but also tends to move around in the engine bay as you put your Focus ST through the paces.We here at Mishimoto ditched the degradation-prone rubber for 5 layers of durable silicone reinforced with steel wire to make sure it stays put in the engine bay and holds its shape against the serious boost pressures running through it. Speaking of shape the Mishimoto performance intercooler pipe is designed with a unique elliptical shape to accommodate for an upgrade to the Mishimoto performance radiator.Our silicone piping also features a 2.5-inch inner diameter increasing volume 10-percent over the stock piping and resulting in a 40-percent increase in flow. The Mishimoto performance cold-side intercooler pipe includes two high-torque worm gear clamps to ensure a secure connection and is covered under the Mishimoto Lifetime Warranty.
One-piece design for uninterrupted airflow easy installation and minimizing boost leaks
40-percent greater flow than stock cold-side pipe
10-percent increase in volume over stock cold-side pipe
Coupler Quantity: 0
Clamp Type: Worm Gear
Hot Side Pipe Inside Diameter: 2.5 IN
Cold Side Pipe Inside Diameter: 2.5 IN
Clamps Included: Yes
Finish: Uncoated
Pipe Color: Black
Clamp Quantity: 2
Coupler Color: Black
Coupler Material: Silicone
Pipe Quantity: 1
Pipe Bend Type: Mandrel
Install Difficulty: N/A
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 2013-2018 Ford Focus ST
SellingPoint02: One-piece design for uninterrupted airflow easy installation and minimizing boost leaks
SellingPoint03: 40-percent greater flow than stock cold-side pipe
SellingPoint04: 10-percent increase in volume over stock cold-side pipe
SellingPoint05: Elliptical shape to accommodate for larger Mishimoto radiator
SellingPoint06: Rigid silicon construction prevents pipe movement under heavy load
SellingPoint07: Available in black
SellingPoint08: Mishimoto Lifetime Warranty
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: Ford Focus ST 2013-2018
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Height (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (1) Silicone Pipe--(2) High-Torque Worm Gear Clamps--Mishimoto Lifetime Warranty
TechSpec Inlet (in): 2.5
TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: N/A
TechSpec Outlet (in): 2.5
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A