Intercooler Pipe Kit, Black, fits Ford 6.7L Powerstroke 2017+ - Mishimoto - MMICP-F2D-17KBK

Mishimoto has developed an intercooler pipe and boot kit for the 2017+ 6.7L Powerstroke for customers looking to upgrade both cold-side and hot-side intercooler pipes at the same time! Upgrade to the Mishimoto kit for increased reliability durability and performance. The pipes are constructed of mandrel bent aluminum with a polished finish and eliminate restrictive bends in the factory pipe allowing for improvements in airflow power and EGTs. The engineers at Mishimoto designed CNC-machined quick-disconnect flanges and IAT sensor housing to allow for an easy install in less than two hours. This intercooler pipe and boot kit is direct fit retaining all factory emissions components and does not require the use of a tuner. This kit includes Mishimoto silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone Diesel Boots. Compared to normal silicone DuraCore provides superior resistance to heat pressure fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power. This pipe and boot kit is the perfect addition to the Mishimoto 6.7L Powerstroke Performance Primary Radiator. It is made in the USA and includes the Mishimoto Lifetime Warranty.
Mandrel-bent polished aluminum pipes eliminates restrictive bends
CNC-machined stock-style coupling allows for quick install
Includes Mishimoto Silicone Boots with DuraCore Technology and Mishimoto Constant Tension T-bolt Clamps
Clamp Type: T-Bolt
Hot Side Pipe Inside Diameter: 0 IN
Cold Side Pipe Inside Diameter: 0 IN
Clamps Included: Yes
Finish: Polished
Pipe Material: Aluminum
Pipe Color: Polished
Clamp Quantity: 8
Coupler Color: Black
Coupler Material: Silicone
Pipe Quantity: 4
Pipe Bend Type: Mandrel
CARB EO Number: D-759-4
Install Difficulty: 3
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for the 6.7L Powerstroke 2017+
SellingPoint02: Mandrel-bent polished aluminum pipes eliminates restrictive bends
SellingPoint03: CNC-machined stock-style coupling allows for quick install
SellingPoint04: Includes Mishimoto Silicone Boots with DuraCore Technology and Mishimoto Constant Tension T-bolt Clamps
SellingPoint05: Installs in under one hour
SellingPoint06: Mishimoto Lifetime Warranty
SellingPoint07: N/A
SellingPoint08: N/A
SellingPoint09: N/A
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2017+ Ford F-250 w/ 6.7L Powerstroke--2017+ Ford F-350 w/ 6.7L Powerstroke--2017+ Ford F-450 w/ 6.7L Powerstroke--2017+ Ford F-550 w/ 6.7L Powerstroke
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Height (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (1) Aluminum Intercooler Pipe w/ CNC Quick-Disconnect Flange--(1) Aluminum Intercooler Pipe w/ CNC Quick-Disconnect Flange O-Ring and Spring Clip--(1) Aluminum Intercooler Pipe w/ CNC IAT Sensor Housing--(1) Aluminum Intercooler Pipe--(4) Silicone Boots with DuraCore Technology--(8) Constant-Tension T-Bolt Clamps--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: Mishimoto has improved this product by including an O-ring and spring clip for both the cold and hot-side pipes. If you did not receive these components with your kit contact our customer experience team or remove the stock O-ring and spring clip and install them onto your Mishimoto CNC-machined coupling.----Executive Order D-759-4 currently covers model years 2017-2018
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A