Intercooler Pipe Kit, Black, fits Chevrolet/GMC 6.6L Duramax 2017-2019 - Mishimoto - MMICP-DMAX-17KWBK

Improve the power and efficiency of your 2017-2019 Chevrolet/GMC 6.6L Duramax L5P with our Mishimoto intercooler pipe and boot kit. The factory L5P intercooler pipes are a measly 2.5in diameter that chokes the engine while tight bends and a resonator on the hot side create even more restriction.The Mishimoto intercooler pipes are 3in in diameter throughout with smooth transitions to significantly increase airflow resulting in more power potential. Our hot-side pipe also eliminates the stock resonator for maximum flow. Combined the Mishimoto intercooler pipes are up to 55-percent less restrictive than stock.Both the hot-side and cold-side utilize a two-piece design for ease of install. To connect the pipes to our Duramax this kit also includes our silicone boots with DuraCore(TM) technology. Mishimoto DuraCore(TM) technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone DuraCore(TM) provides superior resistance to heat pressure fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Our cold-side intercooler pipes also feature a CNC-machined quick-disconnect fitting with new O-ring and spring clip to ensure a secure and leak-free fit. Unlike other available pipes on the market our pipes retain the intake air temp harness mounting location for safe and secure wire routing just as Chevy/GMC intended. Our intercooler pipes also incorporate two bungs that can be drilled and tapped for sensors so you can easily monitor your L5P's performance.The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle black powder coated finish. Like all our Duramax products this kit includes our Mishimoto Lifetime Warranty.
3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends
Up to 55-percent less restrictive than stock piping
Includes new quick-disconnect O-ring and spring clip
Clamp Type: T-Bolt
Hot Side Pipe Inside Diameter: 0 IN
Cold Side Pipe Inside Diameter: 0 IN
Clamps Included: Yes
Finish: Powder Coated
Pipe Material: Aluminum
Pipe Color: Black
Clamp Quantity: 10
Coupler Color: Black
Coupler Material: Silicone
Pipe Quantity: 4
Pipe Bend Type: Mandrel
Install Difficulty: 3
OptionLabel: Wrinkle-Black
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
SellingPoint02: 3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends
SellingPoint03: Up to 55-percent less restrictive than stock piping
SellingPoint04: Includes new quick-disconnect O-ring and spring clip
SellingPoint05: Hot-side eliminates stock resonator for maximum flow
SellingPoint06: Eliminates failure-prone stock throttle valve connector
SellingPoint07: Retains temp sensor harness mount for safe and secure wire routing
SellingPoint08: Internal bead roll ensures secure connection between coupler and throttle valve
SellingPoint09: CNC-machined quick-disconnect ensures precise leak-free fit
SellingPoint10: Additional bungs can be drilled and tapped for sensors
SellingPoint11: Requires no additional tuning
SellingPoint12: Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
SellingPoint13: Available in polished or wrinkle-black powder coated finish
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2017-2019 Chevrolet Silverado 2500 HD w/ 6.6L Duramax L5P--2017-2019 Chevrolet Silverado 3500 HD w/ 6.6L Duramax L5P----2017-2019 GMC Sierra 2500 HD w/ 6.6L Duramax L5P--2017-2019 GMC Sierra 3500 HD w/ 6.6L Duramax L5P
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Height (in): 6
TechSpec Core Length (in): 22
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (3) Aluminum Intercooler Pipes--(1) Aluminum Intercooler Pipe w/ O-Ring and Spring Clip--(5) Silicone Boots with DuraCore Technology--(10) Constant-Tension T-Bolt Clamps--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: N/A
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A