Intercooler Pipe Kit, Black, fits Ford Bronco 2.3L EcoBoost 2021+ - Mishimoto - MMICP-BR23-21USBK

Mishimoto has developed a direct-fit intercooler pipe upgrade kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows you to maximize the performance potential of your 2.3L Bronco. This pipe kit is specifically designed for customers who have previously purchased the Mishimoto performance stock location intercooler and would like to couple it with the Mishimoto pipe kit. This kit includes all the components you will need to upgrade your setup to the full Mishimoto charge air system.----Our kit replaces the weak and unattractive plastic piping with high-flowing durable aluminum piping and silicone boots with DuraCore technology. The Mishimoto intercooler pipes flow up to 61-percent better than the stock pipes allowing your 2.3L EcoBoost to breathe freely and make the most of its turbo. DuraCore boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black these pipes are a great addition to every 2.3L Bronco from daily driving to the office to trailblazing through the woods. The upgrade kit also includes CNC-machined aluminum intercooler outlets which provide unrestricted flow from the pipes to the intercooler maximizing flow and performance.----As with all Mishimoto products this 2021+ Ford Bronco 2.3L EcoBoost intercooler pipe kit is backed by our Mishimoto Lifetime Warranty.
Includes Mishimoto silicone boots with DuraCore technology for superior resistance to heat pressure fuel and oil
Specifically designed for use with the Mishimoto Stock Location Intercooler
Up to 60-percent less restrictive than stock for better flow and power potential
Clamp Type: Worm Gear
Hot Side Pipe Inside Diameter: 0 IN
Cold Side Pipe Inside Diameter: 0 IN
Clamps Included: Yes
Finish: Powder Coated
Pipe Material: Aluminum
Pipe Color: Black
Clamp Quantity: 8
Coupler Color: Black
Coupler Material: Silicone
Pipe Quantity: 2
Pipe Bend Type: Mandrel
Install Difficulty: N/A
OptionLabel: Black
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2021+ Ford Bronco 2.3L EcoBoost with Mishimoto Stock Location Intercooler
SellingPoint02: Specifically designed for use with the Mishimoto Stock Location Intercooler
SellingPoint03: Up to 60-percent less restrictive than stock for better flow and power potential
SellingPoint04: Includes CNC-machined intercooler outlets for unrestricted flow from piping to intercooler
SellingPoint05: Additional 1/8-NPT port on cold-side pipe for methanol injection or additional sensors
SellingPoint06: Includes Mishimoto silicone boots with DuraCore technology for superior resistance to heat pressure fuel and oil
SellingPoint07: Constant-tension worm gear clamps keep a strong grip as pipes and boots expand and contract
SellingPoint08: Available in polished or wrinkle black powder-coated finish
SellingPoint09: Mishimoto Lifetime Warranty
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: Ford Bronco 2.3L L4 2021+
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: U725
TechSpec Core Height (in): N/A
TechSpec Core Length (in): N/A
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: 2.3L EcoBoost
TechSpec Includes: (1) Hot-side Pipe--(1) Cold-side Pipe--(4) Duracore Intercooler Pipe Couplers--(2) CNC quick-disconnects--(8) Constant-Tension Worm Gear Clamps--Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 22 in-lbs (2.5N-M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: This kit is intended as an upgrade for use with the Mishimoto Stock Location Performance Intercooler. It will not fit with the factory Bronco intercooler. To use the stock Bronco intercooler please purchase part number: MMICP-BR23-21
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A