Baffled Oil Catch Can, PCV Side, fits Chevrolet/GMC 1500 5.3L/6.2L 2019+ - Mishimoto - MMBCC-T1-19

The T1 Chevrolet Silverado is offered with both 5.3L and 6.2L LS engines. These engines feature direct injection which is great for creating an efficient burn and saving fuel but allows for carbon buildup on the intake valves. As blow-by flows over the intake valves oil and carbon deposits can build up impeding airflow and eventually preventing the valves from closing. The best way to treat carbon buildup is to prevent it and that's where this Mishimoto Chevrolet/GMC T1 direct-fit catch can kit comes in. This Mishimoto catch can kit diverts blow-by away from the intake and traps it in our catch can. Inside the can a set of air turbulators and baffles separate fuel oil and water vapors from the crankcase gasses and collects them to be drained next time you change your oil. By not returning the blow-by to your oil pan our kit prevents fouling of the oil that could reduce its effectiveness leading to accelerated engine wear. Finally a sintered bronze filter removes any remaining carbon from the crankcase gases so that only clean air returns to your intake. The Mishimoto Chevrolet/GMC T1 catch can kit is a complete bolt-on blow-by solution and includes all necessary components for a hassle-free installation. As with all our products this kit includes our signature Mishimoto Lifetime Warranty.
Installs in under an hour
Protects intake valves from power-robbing carbon buildup
Prevents blow-by from contaminating intake mixture and causing knock
Can Material: 6061-T6 Billet Aluminum
Can Type: Twist Off
Can Outside Diameter: 2.5 IN
Inlet Port Quantity per Can: 1
Outlet Port Quantity per Can: 1
Can Finish: Anodized
Hose Included: Yes
Color: Black
Outlet Port Inside Diameter: 0.6 IN
Inlet Port Inside Diameter: 0.6 IN
Drain Plug Included: Yes
Finish: Anodized
Height: 3.7 IN
Maximum Can Capacity: 3 FO
Interior Baffle: Yes
Mounting Bracket Included: Yes
Install Difficulty: 2
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2019+ Chevrolet/GMC 1500 with 5.3L/6.2L V8
SellingPoint02: Installs in under an hour
SellingPoint03: Protects intake valves from power-robbing carbon buildup
SellingPoint04: Prevents blow-by from contaminating intake mixture and causing knock
SellingPoint05: Internal air diverter baffle and 50 micron bronze filter maximize oil separation
SellingPoint06: Catch can captures blow-by preventing it from fouling the engine oil
SellingPoint07: Direct-fit bracket mounts the catch can away from engine vibration
SellingPoint08: Sturdy 3mm-thick steel brackets withstand rough roads and off-road abuse
SellingPoint09: Pre-installed quick-disconnect fittings for clean installation
SellingPoint10: Filter and can are fully serviceable
SellingPoint11: Mishimoto Lifetime Warranty
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2019-2023 Chevy Silverado 1500 5.3L/6.2L--2019-2023 Chevy Suburban 5.3L/6.2L--2019-2023 Chevy Tahoe 5.3L/6.2L--2019-2023 GMC Sierra 1500 5.3L/6.2L--2019-2023 GMC Yukon 5.3L/6.2L
TechSpec Catch Can Diameter (in): N/A
TechSpec Chassis Codes: T1
TechSpec Drain Plug Thread Size: 3/8-NPT
TechSpec Engine Codes: 5.3L L83--6.2L L87
TechSpec Height (in): N/A
TechSpec Includes: (1) Direct-Fit Mounting Bracket--(1) 3 fl. Oz. Black Anodized 6061-Aluminum Catch Can--(2) CNC-Machined Aluminum Barbed Fittings--(2) Hoses w/ Pre-Installed Quick-Disconnect Fittings--(2) Worm Gear Clamps--Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Inlet: M16x1.5
TechSpec Installation Notes: N/A
TechSpec Material: N/A
TechSpec Note: After installation Mishimoto recommends checking the contents of the baffled catch cans every 1 000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.
TechSpec Outlet: M16x1.5