Baffled Oil Catch Can, PCV Side, fits Ford F150 2.7L/3.5L EcoBoost/5.0L 2011+ - Mishimoto - MMBCC-FRD-11P

Carbon buildup is an enemy of any motor and the Mishimoto Direct-Fit Oil Catch Can system for your 2011+ Ford F-150 is the defense. Modern vehicles use a PCV or Positive Crankcase Ventilation" system to capture the vapors that escape past the piston rings into the crankcase of your engine and recirculate them back into the intake system to be burned again. While this is much better for the environment it's not as great for your engine. In doing so these vapors carry remnants of oil and unburned fuel which make their way into your intake system causing multiple problems. The first and largest problem is that the oil particles being carried in these vapors coat your intake system including the intake manifold and intake valves. Over time this will gum up and turn into carbon buildup. Direct-injection engines like the EcoBoost are especially prone to severe carbon buildup on the intake valves. The second issue is that those oily vapors being introduced back into the cylinder during combustion can reduce the overall octane rating of the fresh fuel being provided causing pre-detonation and knocking. This is where the Mishimoto Direct-Fit Oil Catch Can system comes into play. By installing our catch can in line with your PCV system the 50-micron bronze filter captures those oily particles and allows them to condense until they become heavy enough to drip into the canister to be collected instead of flowing back into your engine. This leaves the air flowing back into your intake system clean and ready to be burned again. The catch can mounts with a sturdy 3-mm thick steel bracket in a convenient and serviceable location allowing you to easily empty the waste oil. The pre-molded hoses with factory style quick-disconnects make installation a breeze and even fit with the factory engine cover. As with all our products this catch can is backed by our signature Mishimoto Lifetime Warranty.
Anodized billet 6061 aluminum construction
Robust 3mm-thick steel bracket ensures a sturdy mounting point in a serviceable location
Helps reduce carbon buildup on intake valves
Can Material: 6061-T6 Billet Aluminum
Can Type: Twist Off
Can Outside Diameter: 2.5 IN
Inlet Port Quantity per Can: 1
Outlet Port Quantity per Can: 1
Can Finish: Anodized
Hose Included: Yes
Color: Black
Outlet Port Inside Diameter: 0.7 IN
Inlet Port Inside Diameter: 0.7 IN
Drain Plug Included: Yes
Finish: Anodized
Height: 3.7 IN
Maximum Can Capacity: 3 FO
Interior Baffle: Yes
Mounting Bracket Included: Yes
Color: N/A
Install Difficulty: 2
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2011+ Ford F-150 2.7L/3.5L EcoBoost and 5.0L
SellingPoint02: Anodized billet 6061 aluminum construction
SellingPoint03: Robust 3mm-thick steel bracket ensures a sturdy mounting point in a serviceable location
SellingPoint04: Helps reduce carbon buildup on intake valves
SellingPoint05: Protects intake system and essential engine components by capturing oil blow-by in the PCV system
SellingPoint06: Application-specific pre-molded hoses fit with stock engine cover
SellingPoint07: Includes factory-style quick-disconnect fittings for easy and secure installation
SellingPoint08: Helps maintain proper octane levels to reduce potential detonation
SellingPoint09: Internal air diverter increases air turbulence to improve oil separation
SellingPoint10: Simple and quick installation with basic hand tools
SellingPoint11: Filter and can are fully serviceable
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: Patent No. US D1 077 006 S
SellingPoint15: Mishimoto Lifetime Warranty
TechSpec Applications: N/A
TechSpec Catch Can Diameter (in): N/A
TechSpec Chassis Codes: N/A
TechSpec Drain Plug Thread Size: N/A
TechSpec Engine Codes: N/A
TechSpec Height (in): N/A
TechSpec Includes: N/A
TechSpec Inlet: N/A
TechSpec Installation Notes: N/A
TechSpec Material: N/A
TechSpec Note: This kit cannot be used in conjunction with MMBCC-F150-11PBE if you have the 5.0L engine MMBCC-F150-11PBE is a more direct fit for 2011-2014 F150 models
TechSpec Outlet: N/A