Borne Off-Road Rear Shock Skid Plates, Black, fits Ford Bronco 2021+ - Mishimoto - BNSD-BR-21RSBK

The lowest point of your Bronco's undercarriage is the rear shock mounts which means that the first thing that will hit and drag on rocks while you're on the trail is the rear shock mounts and/or the shocks themselves. This can cause damage to the mount or the shock itself and especially on the Bilstein shocks with the external reservoir. Being a critical component that supports the weight of the vehicle it is imperative to keep this portion of your undercarriage protected. That's why we came up with the Borne Off-Road Rear Shock Skid Plates for the 2021+ Ford Bronco. When it comes to skid plates strength and coverage are obviously the most important features so we designed them to provide coverage of your shock mount shock and shock reservoir if equipped. To provide strength and rigidity we constructed these from welded 3/16" plate steel with three points of mounting to ensure that they are tough enough to take blows on the trail and not allow rocks and debris to cause damage. We know these will take hits so we not only covered them in a sleek and durable powdercoated finish we first electrogalvanized plated them before powder so even if you do chip or scratch them on obstacles they will continue to be rust resistant. With vented bottoms they will drain any water mud or debris that gets in them. These are a direct bolt-on and will require no modification to your vehicle to install. As with all our products the Borne Off-Road Rear Shock Skid Plates for the 2021+ Ford Bronco include our signature Borne Off-Road Lifetime Warranty.
Fits with standard and Bilstein shocks
Constructed from 3/16-IN thick steel
Slotted to allow drainage
Install Difficulty: 4
OptionLabel: Black
Prop 65 - Short Label: WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Y/N: Y
SellingPoint01: Direct fit for 2021+ Ford Bronco
SellingPoint02: Fits with standard and Bilstein shocks
SellingPoint03: Constructed from 3/16-IN thick steel
SellingPoint04: Electrogalvanized and powdercoated for a rugged and durable rust-resistant finish
SellingPoint05: Bolt-on installation utilizing factory mounting points
SellingPoint06: Provides armored protection for vulnerable low-hanging shock mounts
SellingPoint07: Protects shock reservoir
SellingPoint08: Fits both 2 and 4 door models
SellingPoint09: Includes left and right shock skid plates
SellingPoint10: Slotted to allow drainage
SellingPoint11: Borne Off-Road Lifetime Warranty
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Engine Code: 2.3L EcoBoost 2.7L EcoBoost
TechSpec Fits: 2021+ Ford Bronco
TechSpec Includes: Borne Off-Road Rear Shock Skid Plates (L + R Pair)--(4) Bolts--(4) Flat Washers--(2) Double Captive Nuts--Borne Off-Road Lifetime Warranty inch
TechSpec Installation Torque Specs: 350 lb-ft
TechSpec Length (Inches): 8.15
TechSpec Material: Black Powdercoated Steel
TechSpec Overall Height (Inches): 4.49
TechSpec Overall Width (Inches): 4.57
TechSpec Thickness (Inches): 0.188
TechSpec Weight (lbs): 8.14