Duramax Pushrod Kit | 2001 - 2016 - Merchant Automotive - 10184

Precision ground from 3/8 diameter, .083" wall 4130 heat treated chromoly. Capable of handling over 700 lbs of spring pressure.




Anytime an engine is used for higher RPM then stock or higher boost levels, there is a tremendous amount of stress on the pushrods, add an aftermarket cam with higher lift and some heavy duty valve springs and they are simply not sufficient. Install our heavy duty pushrods that are made to the highest specifications. The ball and socket ends mimic the factory parts perfectly. Because of this, you can be assured that once you set the lash, they will not wear and change adjustment. Our high strength pushrods will prohibit deflection and better control the valve for more horsepower.




These are sold in sets of 16 for a complete engine.
The ball end on the stock pushrod will look much larger then the ball end on these, but the radius is the same at the contact area to the lifter.




Include