In Stock
KryptoniteSKU: BSD-KYP-KR800223-2
TIE ROD ENDS (PAIR) FOR 2007–2013 1/2 TON 6-LUG CHEVY/GMC TRUCKS - Kryptonite - KR800223-2
$159.49
Shipping Estimate
Enter destination details for an instant shipping estimate. Final rates are confirmed at checkout.
Description
Important Fitment Details:
These tie rod ends fit only steering rack equipped 2007-2013 1500 models. No removal of the inner tie rod end is required. This tie rod end is an OEM sized replacement and does not fit lift kits that require specialty tie rod ends.
SOLD AS A PAIR
Features:
High Grade Material - Heat-treated 4140 Chromoly studs.
Fully Serviceable Design - 1/4"x 28 Standard Grease fitting to keep these running in peak form.
Solid 1" Hexagon steel body - Extra strength and easy adjustment all in one.
Description:
Engineered exclusively for the extreme demands of today's heavy duty truck to work with stock or modified suspension, Kryptonite Death Grip tie rod ends will fit any 2007-2013/14 GM 1500 6 lug truck equipped with rack and pinion steering. These tie rod ends will not fit a truck with Center Link found before 2007.
Using superior components and engineering, these tie rods easily outperform the competition.
This Listing is for a pair of 2 Outer Tie rod ends, as seen in photo.
In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite series tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite tie rods held up to an incredible 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Instructions:
CLICK HERE FOR COMPLETE VEHICLE FITMENT INFORMATION
CLICK HERE FOR INSTALLATION INSTRUCTIONS
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it-we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase . Complete warranty details can be found [ here ] .
These tie rod ends fit only steering rack equipped 2007-2013 1500 models. No removal of the inner tie rod end is required. This tie rod end is an OEM sized replacement and does not fit lift kits that require specialty tie rod ends.
SOLD AS A PAIR
Features:
High Grade Material - Heat-treated 4140 Chromoly studs.
Fully Serviceable Design - 1/4"x 28 Standard Grease fitting to keep these running in peak form.
Solid 1" Hexagon steel body - Extra strength and easy adjustment all in one.
Description:
Engineered exclusively for the extreme demands of today's heavy duty truck to work with stock or modified suspension, Kryptonite Death Grip tie rod ends will fit any 2007-2013/14 GM 1500 6 lug truck equipped with rack and pinion steering. These tie rod ends will not fit a truck with Center Link found before 2007.
Using superior components and engineering, these tie rods easily outperform the competition.
This Listing is for a pair of 2 Outer Tie rod ends, as seen in photo.
In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite series tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite tie rods held up to an incredible 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Instructions:
CLICK HERE FOR COMPLETE VEHICLE FITMENT INFORMATION
CLICK HERE FOR INSTALLATION INSTRUCTIONS
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it-we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase . Complete warranty details can be found [ here ] .
Related Products
94-99 Dodge Ram 2500 Base (RWD) Differential - Rear - Zumbrota Drivetrain - RAA435-1764B-P
$4,493.39
Cadillac, Chevrolet, GMC (4WD/RWD) Differential Ring and Pinion Kit - Rear - Yukon Gear and Axle - YGK2005
$2,548.94
Chevrolet, GMC (RWD) Differential - Rear - Zumbrota Drivetrain - RAA435-1215CL-P
$2,789.64
