22-25 Toyota Tundra (4WD/RWD - Coil) Suspension Lift Kit - ICON Vehicle Dynamics - K53192

SUSPENSION SYSTEM
K53192
OEM Wheels and Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys - 17x8.
5" w/ 5.
75” Backspace / 25mm Offset
Recommended Aftermarket Tires: 35" x 12.
50" (Minor fender trimming and modifications may be required)
APPLICATION NOTE #55: Shocks are fully serviceable.
Lift heights indicated are for a stock equipped vehicle.
APPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle.
Increasing weight of vehicle due to accessories will alter lift lange.
APPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.
APPLICATION NOTE #144: Not compatible with TRD Pro
APPLICATION NOTE #149: For 4WD models without TRD Off-Road package ICON recommends using ICON Diff Drop (Part# 55156) or using Toyota TRD axles (Part# 434200C020 Driver / 434100C020 Pass).
Failure to do so could result in front axle damage.
Not required for TRD Pro.
APPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles
APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
APPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required
TECH NOTE: Tundra SR5 equipped with TRD Sport Suspension package will have lift height range of 1-4” over stock
TECH NOTE: Included rear shocks are compatible with 0-1.
5" of rear lift over stock on models equipped with rear coil springs without TRD suspension package.
Rear shocks are compatible with 0-1" of rear lift over stock on models equipped with rear coil springs with TRD suspension package.
22-25 TUNDRA 0-3" STAGE 2 SUSPENSION SYSTEM BILLET
Stage 2 includes a pair of 2.
5 EXP Series coilovers for 2-3” of front lift, improved performance, and 35” tire fitment.
Billet UCAs for alignment correction are included with 2.
0 Series rear shocks to balance the tuning from front to rear.
The ICON Vehicle Dynamics Stage 2 complete suspension system for the 2022-2025 Toyota Tundra builds on ICON's 2.
5 EXP Shock Kit with the addition of billet front upper control arms, providing proper alignment at any ride height, improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35" tires.
This system features the innovative new 2.
5 EXP series coilover shocks and sway bar drop kit for the front of the truck along with our proven 2.
0 nitrogen charged monotube shock with internal reservoir for the rear.
This Stage 2 system features the 2022-2025 Toyota Tundra EXP Series front shock absorbers that combine the performance of a fully rebuildable 2.
5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the Tundra’s factory coil spring and other components.
EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package.
The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new 2022-2025 Toyota Tundra with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance.
Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.
The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range.
This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.
Rounding out the Stage 2 suspension system are V.
S.
2.
0 Aluminum Series rear shocks specially tailored for the 2022-2025 Tundra.
The 2.
0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance.
Their pairing with the ICON 2.
5 EXP Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Tundra.
Vehicle specific design for 2022-2025 Toyota Tundra
2.
5 EXP Series front shocks with internal reservoirs utilize factory coil and coil hardware
Adjustable front ride heights from 0-3” of front lift over stock with the use of snap ring and included billet UCAs
Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability
UCAs feature the patented (U.
S.
Pat.
10,731,700) Delta Joint Pro with 90 degrees of total articulation
Included sway bar drop brackets reduce bind in OE sway bar links
Allows for full wheel travel without overstressing OE components
2.
0 Aluminum Series rear shocks provide balanced tune with coilovers and increased performance
All ICON shock absorbers are fully rebuildable and re-tunable
100% Bolt-on system - no drilling, cutting, or welding necessary for install
ICON 2022-2025 Toyota Tundra, 0-3" Lift, Stage 2, 2.
5 EXP Suspension System, Billet, K53192
ICON 2022-2025 Toyota Tundra, 0-3" Lift, Stage 2, 2.
5 EXP Suspension System, Billet
ICON 22-25 TUNDRA 0-3" STAGE 2 SUSPENSION SYSTEM BILLET.

Detailed Fitment Results
Year Make Model Submodel 2022 Toyota Tundra SR 2022 Toyota Tundra 1794 Edition 2022 Toyota Tundra Limited 2022 Toyota Tundra SR5 2022 Toyota Tundra Platinum 2022 Toyota Tundra Limited TRD Off-Road 2022 Toyota Tundra Platinum 1794 Edition 2022 Toyota Tundra SR5 TRD Off-Road 2022 Toyota Tundra SR TRD Off-Road 2023 Toyota Tundra SR 2023 Toyota Tundra 1794 Edition 2023 Toyota Tundra Limited 2023 Toyota Tundra SR5 2023 Toyota Tundra Platinum 2024 Toyota Tundra SR 2024 Toyota Tundra 1794 Edition 2024 Toyota Tundra Limited 2024 Toyota Tundra SR5 2024 Toyota Tundra Platinum 2025 Toyota Tundra SR 2025 Toyota Tundra 1794 Edition 2025 Toyota Tundra Limited 2025 Toyota Tundra SR5 2025 Toyota Tundr…