20-22 Jeep Gladiator Suspension Lift Kit - Front and Rear - ICON Vehicle Dynamics - K22103

SUSPENSION SYSTEM
20-UP GLADIATOR 2.
5" STAGE 3 SUSP SYS
OEM Wheels and Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys - 17x8.
5" w/ 4.
5” Backspace / -6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.
5” Backspace / -12mm Offset
Recommended Aftermarket Tires: 35" x 12.
50" (37" x 12.
50" with optional bump stop spacer kit PN: 22071)
APPLICATION NOTE #30: An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength
APPLICATION NOTE #127: Will Not Fit Gladiator Mojave Trim
APPLICATION NOTE #150: Shocks Are Fully Serviceable
TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch.
Lift heights may be higher than advertised if installed on a stock weighted vehicle.
TECH NOTE: Diesel models will net approx.
1.
75" of front lift over stock due to their heavier weight.
Ships In Multiple Boxes
20-UP GLADIATOR 2.
5" STAGE 3 SUSPENSION SYSTEM
2020-UP JEEP GLADIATOR JT 2.
5" STAGE 3 SUSPENSION SYSTEM
The Stage 3 ICON 2.
5” Suspension System for the Jeep Gladiator is the ideal setup for significantly improving on-road ride quality for the daily driven application that will see occasional moderate off-road use.
This complete suspension system features 2.
0 Aluminum Series shocks, 2.
5” lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, and all necessary hardware for install.
This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire.
For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).
2.
5" lift height
Fits 35" tires (37" with extended bump stop spacer kit)
33% front, 23% rear increase in wheel travel
Improves on and off-road ride quality over stock
Front lower links included for caster angle correction and improved front end articualtion
Dual rate front coil springs with lifetime guarantee against sagging/breakage
Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
2.
0 Aluminum Series shocks with vehicle specific valving
Adjustable, billet aluminum front sway bar links
100% bolt-on system makes for an easy install
“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
ICON 2020-Up Jeep Gladiator, 2.
5" Lift, Stage 3 Suspension System, K22103
ICON 2020-Up Jeep Gladiator, 2.
5" Lift, Stage 3 Suspension System.

Detailed Fitment Results
Year Make Model Submodel Fitment Notes 2020 Jeep Gladiator Overland Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2020 Jeep Gladiator Sport S Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2020 Jeep Gladiator Sport Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2020 Jeep Gladiator Rubicon Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2020 Jeep Gladiator Launch Edition Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2020 Jeep Gladiator Altitude Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2021 Jeep Gladiator Overland Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2021 Jeep Gladiator Sport S Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2021 Jeep Gladiator Sport Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2021 Jeep Gladiator Rubicon Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. 2021 Jeep Gladiator Willys Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace…