Out of Stock
Randy's Worldwide : ICON Vehicle DynamicsSKU: BSD-ICN-K22011
18-22 Jeep Wrangler Suspension Lift Kit - Front and Rear - ICON Vehicle Dynamics - K22011
$2,085.91
Shipping Estimate
Enter destination details for an instant shipping estimate. Final rates are confirmed at checkout.
Description
JEEP JL 2.
5" STAGE 1
2018-UP JEEP JL 2.
5" STAGE 1 SUSP SYS
OEM Wheels and Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys - 17x8.
5" w/ 4.
5” Backspace / -6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.
5” Backspace / -12mm Offset
Recommended Aftermarket Tires: 35" x 12.
50" (37" x 12.
50" with optional bump stop spacer kit PN: 22029)
APPLICATION NOTE #30: An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength
APPLICATION NOTE #66: 2 Door Models Sit Slightly Higher Than 4 Door Models But Remain Level When Installed
APPLICATION NOTE #150: Shocks Are Fully Serviceable
TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire.
Lift heights may be higher than advertised if installed on a stock weighted vehicle.
TECH NOTE: Not compatible with Wrangler 4xe or Unlimited Rubicon 392 trims.
See ICON Help Center for more information.
TECH NOTE: Diesel models will net approx.
1.
75" of front lift over stock due to their heavier weight.
Ships In Multiple Boxes
18-UP JEEP JL 2.
5" STAGE 1 SUSPENSION SYSTEM
2018-UP JEEP JL 2.
5" LIFT STAGE 1 SUSPENSION SYSTEM
Through an accelerated testing process dubbed the “ICON1K” RandD program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle.
This 2.
5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.
The ICON Vehicle Dynamics Stage 1 2.
5" Suspension System for the 2018-UP Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle.
The Stage 1 system is ICON's entry level offering for Jeep enthusiasts looking to add lift height and wheel travel to their JL without breaking the bank.
This system includes 2.
5" lift dual rate coil springs, Vehicle Specific 2.
0 Aluminum Series shocks, bump stop spacers, sway bar links, and all necessary hardware to complete the installation.
With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL.
The Stage 1 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications.
For users looking to install 37" tires, an optional extended bump stop spacer kit (PN: 22029) is available.
Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others.
Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance.
With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors.
This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade.
Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
2.
5" lift height
Fits 35" tires (37" with optional extended bump stop spacer kit PN: 22029)
3" front, 2" rear increase in wheel travel
Improves on and off-road ride quality over stock
Dual rate coil springs with lifetime guarantee against sagging/breakage
2.
0 Aluminum Series shocks with vehicle specific valving
100% bolt-on system makes for an easy install
“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
ICON Vehicle Dynamics, 2.
5" Lift, Stage 1 Suspension System, Compatible with 18-Up JL Wrangler, K22011
ICON 2018-Up Jeep JL Wrangler, 2.
5" Lift, Stage 1 Suspension System.
Detailed Fitment Results
Year Make Model Submodel Qualifiers Fitment Notes 2018 Jeep Wrangler Unlimited Sahara Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.75” Backspace / 0mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. 2018 Jeep Wrangler Sport Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.75” Backspace / 0mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. 2018 Jeep Wrangler Unlimited Sport Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.75” Backspace / 0mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. 2018 Jeep Wrangler Rubicon Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. 2018 Jeep Wrangler Unlimited Sport S Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.75” Backspace / 0mm Of…
5" STAGE 1
2018-UP JEEP JL 2.
5" STAGE 1 SUSP SYS
OEM Wheels and Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys - 17x8.
5" w/ 4.
5” Backspace / -6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.
5” Backspace / -12mm Offset
Recommended Aftermarket Tires: 35" x 12.
50" (37" x 12.
50" with optional bump stop spacer kit PN: 22029)
APPLICATION NOTE #30: An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength
APPLICATION NOTE #66: 2 Door Models Sit Slightly Higher Than 4 Door Models But Remain Level When Installed
APPLICATION NOTE #150: Shocks Are Fully Serviceable
TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire.
Lift heights may be higher than advertised if installed on a stock weighted vehicle.
TECH NOTE: Not compatible with Wrangler 4xe or Unlimited Rubicon 392 trims.
See ICON Help Center for more information.
TECH NOTE: Diesel models will net approx.
1.
75" of front lift over stock due to their heavier weight.
Ships In Multiple Boxes
18-UP JEEP JL 2.
5" STAGE 1 SUSPENSION SYSTEM
2018-UP JEEP JL 2.
5" LIFT STAGE 1 SUSPENSION SYSTEM
Through an accelerated testing process dubbed the “ICON1K” RandD program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle.
This 2.
5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.
The ICON Vehicle Dynamics Stage 1 2.
5" Suspension System for the 2018-UP Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle.
The Stage 1 system is ICON's entry level offering for Jeep enthusiasts looking to add lift height and wheel travel to their JL without breaking the bank.
This system includes 2.
5" lift dual rate coil springs, Vehicle Specific 2.
0 Aluminum Series shocks, bump stop spacers, sway bar links, and all necessary hardware to complete the installation.
With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 2018-UP JL.
The Stage 1 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications.
For users looking to install 37" tires, an optional extended bump stop spacer kit (PN: 22029) is available.
Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others.
Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance.
With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors.
This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade.
Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
2.
5" lift height
Fits 35" tires (37" with optional extended bump stop spacer kit PN: 22029)
3" front, 2" rear increase in wheel travel
Improves on and off-road ride quality over stock
Dual rate coil springs with lifetime guarantee against sagging/breakage
2.
0 Aluminum Series shocks with vehicle specific valving
100% bolt-on system makes for an easy install
“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
ICON Vehicle Dynamics, 2.
5" Lift, Stage 1 Suspension System, Compatible with 18-Up JL Wrangler, K22011
ICON 2018-Up Jeep JL Wrangler, 2.
5" Lift, Stage 1 Suspension System.
Detailed Fitment Results
Year Make Model Submodel Qualifiers Fitment Notes 2018 Jeep Wrangler Unlimited Sahara Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.75” Backspace / 0mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. 2018 Jeep Wrangler Sport Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.75” Backspace / 0mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. 2018 Jeep Wrangler Unlimited Sport Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.75” Backspace / 0mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. 2018 Jeep Wrangler Rubicon Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.50” Backspace / -6mm Offset
Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle. 2018 Jeep Wrangler Unlimited Sport S Recommended Aftermarket Wheel Size: 17x8.5 inch with 4.75” Backspace / 0mm Of…
