10-15 Chevrolet Camaro (3.6, 6.2, 7.0) Brake Hydraulic Line Lock Kit - Hurst - 5671518

HURST BHLLK
Line/Loc Kit
1015 CAMARO ROLLCONTROL
Fits 2010-2015 Chevrolet Camaro
Hurst Shifters; performance; shifter; transmission; knob; linkage; kit; automatic; manual; 5671518; roll; control; camaro; chevrolet kit
Hurst Roll/Control, Line/Loc Kit - Chevrolet Camaro
2010-2015 Chevrolet Camaro models.
The Hurst® Roll/Control®, Line/Loc® kit for your 2010-2015 Chevrolet Camaro is primarily used in drag racing to lock the front wheels allowing for more consistent burnouts when heating up the tires to make a pass. This kit comes with all the necessary parts needed to easily install a Hurst Line/Loc system on your Camaro. Includes a stainless steel Roll/Control valve, brake line, fittings, lighted momentary switch, bracket, wiring and much more. Rigorous testing has proved a 1/100,000 of a second release time and vibration tests have seen up to 30 G's applied without mechanical failure. Adaptable to most domestic and import hydraulic brake systems. Advanced quality design stainless steel valve assembly for ultimate corrosion resistance. Fully enclosed epoxy molded electrical coil for reliability. Attractive finned aluminum housing helps dissipate heat. Wider lightweight base provides better mounting stability 150 micron screen filtered ports to prevent contamination. Field serviceable for cleaning or rebuilding. Extra threaded port for separate bleeder or brake line pressure gauge Kit includes solenoid valve, snap-action switch, indicator light, 4-amp fuse, mounting screws and installation instructions. Note: Not recommended for use as a parking brake, or for longer then 60 seconds maximum at any one time.
Extra Threaded Port for Separate Bleeder or Brake Line Pressure Gauge
Stainless Steel Valve Assembly for Ultimate Corrosion Resistance
150 Micron Screen Filtered Ports help Prevent Contamination
Can be Used to Hold Brakes for Up to 60 Seconds Maximum
Attractive Finned Aluminum Housing Helps Dissipate Heat
Field Servicable for Cleaning or Rebuilding
Fully Enclosed, Epoxy-Molded Coil
Extra Threaded Port for Separate Bleeder or Brake Line Pressure Gauge
Stainless Steel Valve Assembly for Ultimate Corrosion Resistance
150 Micron Screen Filtered Ports help Prevent Contamination
Can be Used to Hold Brakes for Up to 60 Seconds Maximum
Attractive Finned Aluminum Housing Helps Dissipate Heat
Field Servicable for Cleaning or Rebuilding
Fully Enclosed, Epoxy-Molded Coil
Additional Contents: Solenoid, screws, fuse, arming switch, momentary switch, wire, intermediate brake lines, fittings and bracket
Amp Rating: 4
Automotive Item Grade: High Performance
Brand: Hurst
California Proposition 65 Chemical Name: Chromium (hexavalent compounds)
California Proposition 65 Chemical Name: Lead
California Proposition 65 Required: Yes
Category: Brake
Emission Code: 5
Inlet Port Gender: Female
Inlet Ports: 1
Inlet Thread Size: 1/8 inch
Installation Hardware Included: Yes
Lighted Switch: Yes
Material: Stainless Steel
Mounting Method: Screw down
Outlet Port Gender: Female
Outlet Ports: 3
Outlet Thread Size: 1/8 inch
part type: Brake Hydraulic Line Lock Kit
Product Type: Brake Line Lock Kit
Sub Category: Service Kits
Switch: Activation/Engagement Switch
Switch Actuation Type: Push Button
Warning: California Proposition 65

Detailed Fitment Results
Year Make Model Engine Size Sub Model 2010 Chevrolet Camaro 6.2 SS 2010 Chevrolet Camaro 3.6 LS / LT 2011 Chevrolet Camaro 6.2 SS 2011 Chevrolet Camaro 3.6 LS / LT 2012 Chevrolet Camaro 6.2 SS / ZL1 2012 Chevrolet Camaro 3.6 LS / LT 2013 Chevrolet Camaro 6.2 SS / ZL1 2013 Chevrolet Camaro 3.6 LS / LT 2014 Chevrolet Camaro 6.2 SS / ZL1 2014 Chevrolet Camaro 3.6 LS / LT 2014 Chevrolet Camaro 7.0 Z / 28 2015 Chevrolet Camaro 6.2 SS / ZL1 2015 Chevrolet Camaro 3.6 LS / LT 2015 Chevrolet Camaro 7.0 Z / 28