Out of Stock
BAER BrakesSKU: BSD-BER-4301521R
Brake System 14 Inch Front Extreme+ Red 63-82 GM/RideTech Y Body - BAER Brakes - 4301521R
$6,089.93
Shipping Estimate
Enter destination details for an instant shipping estimate. Final rates are confirmed at checkout.
Description
This front system features the 6S 6-piston Monoblock caliper mounted to a 14 inch 2-piece slot, drill, zinc plated rotor. Baer systems include stainless steel brake hoses as well as calipers that have D.O.T. compliant dust and weather seals. Quality bearings used, along with NAS high grade stainless hardware for our pre-assembled 2-piece rotor. The 6S and 6R R-Spec calipers are Baers Flagship offering, and are built out of a single piece of US sourced 2618 forged aluminum.
Fitment:
Designed to be used with 1963-1982 GM Y-Body With RideTech TruTurn Suspension
Why Purchase the Extreme+?
US Made Forged MonoBlock caliper
Offers the exact same look front and rear. Baer is the only brake manufacturer that offers this!
Everything needed including hoses and fittings
6061 T-6 billet aluminum hat anodized black and bolted to the rotor
High grade U281 fine thread stainless hardware with captured nuts. Rotor comes pre-assembled.
Includes a set of 6061-T6 billet machined hubs with quality bearings installed. Hubs are pre-assembled with bearings, races, studs and packed with Redline synthetic grease.
The 6S Extreme+ Caliper Features:
The only 6-Piston forged monoblock offered to the road-going/street market
Stainless steel pistons, abutments and noise suppression springs
Staggered piston sizes to minimize pad wear
Uses the common D1247 or DR11 race pad backing plate, that is shared by many other competition calipers
Dual seals, dust/weather and pressure, to meet D.O.T. specifications
Caliper can accept 13.5 to 16 inch rotors
Machined logo that is hand painted
Red Powder Coat Finish - Standard Colors Are: Red, Black or Silver Powder Coat Finish - Custom colors available
Available in Front or Rear for that same cosmetic matching look
Uses correct banjo style fittings, Baer does not use any pipe thread
Minimum Tire Size is 18 inches - Use template to verify fitment
100 percent MADE IN USA with US sourced material!
Fitment:
Designed to be used with 1963-1982 GM Y-Body With RideTech TruTurn Suspension
Why Purchase the Extreme+?
US Made Forged MonoBlock caliper
Offers the exact same look front and rear. Baer is the only brake manufacturer that offers this!
Everything needed including hoses and fittings
6061 T-6 billet aluminum hat anodized black and bolted to the rotor
High grade U281 fine thread stainless hardware with captured nuts. Rotor comes pre-assembled.
Includes a set of 6061-T6 billet machined hubs with quality bearings installed. Hubs are pre-assembled with bearings, races, studs and packed with Redline synthetic grease.
The 6S Extreme+ Caliper Features:
The only 6-Piston forged monoblock offered to the road-going/street market
Stainless steel pistons, abutments and noise suppression springs
Staggered piston sizes to minimize pad wear
Uses the common D1247 or DR11 race pad backing plate, that is shared by many other competition calipers
Dual seals, dust/weather and pressure, to meet D.O.T. specifications
Caliper can accept 13.5 to 16 inch rotors
Machined logo that is hand painted
Red Powder Coat Finish - Standard Colors Are: Red, Black or Silver Powder Coat Finish - Custom colors available
Available in Front or Rear for that same cosmetic matching look
Uses correct banjo style fittings, Baer does not use any pipe thread
Minimum Tire Size is 18 inches - Use template to verify fitment
100 percent MADE IN USA with US sourced material!
Related Products
Brake System 13 Inch Rear SS4+ w/Park Brake Silver 79-92 Mustang 5 Lug - BAER Brakes - 4262275S
$2,869.93
2 Inch Block & U-Bolt Kit - Ford F-250 Super Duty 2WD/4WD (2005-2010) - Rough Country - 6557
$151.95
6 Inch Lift Kit w/ 4-Link - Ford F350 Super Duty DRW (20-22) 4WD - Diesel
$8,087.52
2002 Jeep Liberty (3.7 - Power - Disc/Drum) Differential - Rear - Zumbrota Drivetrain - RAA435-2114C-P
$2,634.49