14-19 Chevrolet Corvette (6.2) Exhaust System Kit - aFe Power - 49-34056-1C

Axle-Back Exhaust
MACH Force-Xp Axle-Back Exhaust System
Exhaust System Kit
MACH Force-Xp 304 Stainless Steel Axle-Back Exhaust System w/ Carbon Fiber Tip
Chevrolet Corvette (C7) 14-19 V8-6.2L LT1
MACH Force-Xp 304 Stainless Steel Axle-Back Exhaust System w/ Carbon Fiber Tips Chevrolet Corvette (C7) 14-19 V8-6.2L LT1
In testing, the axle-back exhaust system resulted in gains up to +7 horsepower and +10 lbs. x ft. of torque verified by our in-house dyno. Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. This axle-back exhaust system incorporates factory style NPP dual mode and AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Finishing off this system are quad light weight, 4"diameter carbon fiber tips. The tips feature an aFe POWER logo which give an aggressive yet elegant sporty look. High quality band clamps are used for a complete 360 degree sealing surface. The performance axle-back exhaust system is constructed of 3" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. Failures of original equipment AFM and NPP actuators are not covered by aFe POWER's warranty
Dyno-Proven Gains up to +7 HP and +10 Lbs. x Ft. TQ
Constructed from 100% Hand TIG-Welded, 3" to 2-1/2" Mandrel Bent, Brushed Finish 304 Stainless Steel Tubing
Includes Factory Style NPP Dual Mode and AFM Exhaust Valves
Utilizes Unique Dual High Flow, Stainless Steel Mufflers
Includes Quad 4" Diameter, Carbon Fiber Tips with aFe POWER Logo
Uses all Factory Hanger Locations for a Hassle-Free InstallationDyno-Proven Gains up to +7 HP and +10 Lbs. x Ft. TQ; Constructed from 100% Hand TIG-Welded, 3" to 2-1/2" Mandrel Bent, Brushed Finish 304 Stainless Steel Tubing; Includes Factory Style NPP Dual Mode and AFM Exhaust Valves; Utilizes Unique Dual High Flow, Stainless Steel Mufflers; Includes Quad 4" Diameter, Carbon Fiber Tips with aFe POWER Logo; Uses all Factory Hanger Locations for a Hassle-Free Installation
Exhaust Type: Axle-Back
Exit Location: Rear center
Horse Power Increase: 7
Muffler Finish: Brushed
Muffler Included: Yes
Muffler Material: 304 Stainless Steel
Sound Level: Aggressive
System Finish: Brushed
System Material: 304 Stainless Steel
Tip Cut: Straight
Tip Edge Style: Non-rolled edge, single-wall
Tip Finish: Carbon Fiber
Tip Included: Yes
Tip Material: Carbon Fiber
Tip Outlet Size: 4
Tip Quantity: Four
Torque Increase: 10
Tubing Diameter: 3 to 2-1/2
WARNING CA Proposition 65: Yes
WARNING CA Proposition 65 Message: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Detailed Fitment Results
Year Make Model Fitment Notes 2014 Chevrolet Corvette This item will only fit models equipped with AFM valves 2015 Chevrolet Corvette This item will only fit models equipped with AFM valves 2016 Chevrolet Corvette This item will only fit models equipped with AFM valves 2017 Chevrolet Corvette This item will only fit models equipped with AFM valves 2018 Chevrolet Corvette This item will only fit models equipped with AFM valves 2019 Chevrolet Corvette This item will only fit models equipped with AFM valves